Rotor Rain
Micro-sprinkler- Flow
- 8.0–105 gph
- Pressure
- 15–30 psi
- Throw diameter
- 9.2–42 ft
- Sizes
- 11 nozzles, .035"–.110"
- Best for
- Precision micro-sprinkler for undertree and overhead irrigation in orchards, vineyards, row crops and nurseries
ML Irrigation / Manufacturers / Antelco
Antelco
Antelco are an Australian maker whose range is built around micro-irrigation for containers and protected cropping — spray jets and micro-sprinklers, on-line drippers, and the enormous fittings range that connects it all together. Their strength is the small parts nobody else stocks in depth.
Micro-sprinkler 5
Rotor Rain Plus Mini Sprinkler
Micro-sprinkler- Flow
- 5.8–98.3 gph
- Pressure
- 15–35 psi
- Sizes
- 11 nozzles, .031"–.110"
- Best for
- Smaller pattern version of the Rotor Rain for tighter spacings
Rotor Rain Plus PC
Micro-sprinkler- Flow
- 5.7–36.1 gph
- Pressure
- 20–60 psi
- Pressure comp.
- Yes · Non-PC version: Rotor Rain Plus
- Sizes
- 11 nozzles, .031"–.110"
- Best for
- Pressure-compensating version for uniform output across long runs and undulating ground
Rotor Max
Micro-sprinkler- Pressure
- 15–40 psi
- Throw diameter
- 22–46 ft
- Sizes
- 7 nozzles, .080"–.150"
- Best for
- Larger-pattern rotating micro-sprinkler for wider spacings
Stake-Mounted Micro-Sprinkler Assemblies
Micro-sprinkler- Best for
- Antelco micro-sprinklers supplied on a stake with micro-tube and fitting — dropped straight into the container rather than assembled part by part. Their dripper range and stake assemblies sit on the same page, so the sprinkler and emitter versions can be compared side by side
Multi-outlet dripper (MODS) 1
Multi-Outlet Dripper Assemblies
Multi-outlet dripper (MODS)- Best for
- The multi-outlet side of the Antelco assembly range — one take-off feeding several containers through micro-tube. Also listed under Micro-sprinklers, where the same assemblies are shown as stake-mounted heads
Spray stakes & emitters 10
Shrubbler 360° / 180°
Spray stakes & emitters- Connection
- 0.16" barb or 10-32 UNF thread
- Best for
- The original Shrubbler. Rotating the click-indexed cap changes both flow and coverage, so one part covers a range of pot sizes and you can dial a plant up or down without swapping emitters. 360° and 180° patterns
Shrubbler 360° PC
Spray stakes & emitters- Pressure comp.
- Yes
- Best for
- Shrubbler pattern with pressure compensation, for long runs and uneven ground where an adjustable non-PC emitter would drift
PotStream
Spray stakes & emitters- Best for
- Adjustable emitter aimed at pots and planter boxes — flow and coverage tuned per plant
Mini Bubbler
Spray stakes & emitters- Best for
- Bubbler output for containers and basins where a spray would drift or a dripper would channel
Midi Drip Emitter
Spray stakes & emitters- Flow
- 1 gph and 2 gph
- Best for
- Fixed-flow emitter with a wide flow path, for pots, beds, shrubs, fruit trees, vines and row crops where pressure is already stable
Agri Drip PC
Spray stakes & emitters- Flow
- 1 gph (grey) and 2 gph (green)
- Pressure comp.
- Yes
- Best for
- PC emitter for agricultural runs — constant flow whatever the pressure does along the line
SPEC Drip PC Self-Piercing
Spray stakes & emitters- Flow
- 1 gph and 2 gph
- Pressure comp.
- Yes
- Best for
- Pierces the tube as it is fitted — no punch, no separate step, and no chance of a mis-sized hole leaking
CETA PC Take-Apart
Spray stakes & emitters- Flow
- 1 gph and 2 gph
- Pressure comp.
- Yes
- Best for
- Comes apart for cleaning rather than being replaced when it blocks — worth it on dirty water or where labour to walk the block is the real cost
Asta Drip Spike PC
Spray stakes & emitters- Flow
- 1 gph and 2 gph
- Pressure comp.
- Yes
- Best for
- PC emitter and spike in one, so the assembly stakes straight into the pot without a separate stake and tube
Pinch Drip PC
Spray stakes & emitters- Flow
- 1 gph and 2 gph
- Pressure comp.
- Yes
- Best for
- Compact PC emitter for gardens, landscaping, nurseries, vineyards, orchards and row crops
Hose & fittings 4
Micro Fittings
Hose & fittings- Best for
- The barbed micro fittings that join 4/7 and ¼" tube — tees, elbows, couplings and plugs
Xpando Fittings & Take-Off Director
Hose & fittings- Best for
- The Xpando grips by expanding into the punched hole rather than relying on a barb alone, which is what stops take-offs blowing out under pressure
Double Barb DB Fittings
Hose & fittings- Best for
- Two barbs instead of one for a firmer hold on the tube
Green Back Valves / eZyvalve4
Hose & fittings- Best for
- Green Back and threaded valves plus the eZyvalve4 for isolating micro zones
Filtration 1
Filters
Filtration- Best for
- Antelco’s inline filters for micro and drip systems
Pressure regulator 1
Pressure Regulating Devices
Pressure regulator- Best for
- Antelco’s pressure regulating devices for holding micro zones at a set pressure
Antelco by category
Micro-sprinkler·Multi-outlet dripper (MODS)·Spray stakes & emitters·Hose & fittings·Filtration·Pressure regulator