MLML Irrigation

ML Irrigation / Products / Spray Stakes & Emitters

Spray Stakes & Emitters

Button emitters, PC drippers, spray stakes and drip assemblies for container and pot production.

58 products · 6 manufacturers · wholesale · ships nationwide

Request a quote

Netafim

Woodpecker PC Junior with CNL (WPCJ)

Spray stakes & emitters
Flow
0.53 gph (red), 1.06 gph (grey), 2.11 gph (green) — colour-coded on base and body
Pressure
Recommended operating range 10.2–58 psi; shut-off (closing) pressure 1.7 psi, about 3.9 ft of head
Pressure comp.
Yes — with CNL anti-drain
Best for
The smaller Woodpecker. It starts compensating lower than the full-size WPC-CNL — 10.2 psi against 14.5 — and seals at a lower head, 3.9 ft against 5 ft, so it suits shallower slopes and lower-pressure systems where the larger dripper would not close cleanly
Catalog ↗

Woodpecker PC (WPC)

Spray stakes & emitters
Flow
0.53 gph (red), 1.06 gph (black), 2.25 gph (green) — colour-coded on the base
Pressure
Recommended operating range 7–58 psi — the widest compensation range in the line
Pressure comp.
Yes · Non-PC version: Woodpecker Dripper (WP)
Best for
Holds a uniform flow rate from 7 to 58 psi, so the first and last plant on a long or sloping run get the same water. Suits vineyards and orchards where the lateral covers real elevation. Turbonet flow path gives the dripper an unusually large water passage — the industry’s widest flow path and a wider cross-section — so contaminants pass straight through instead of lodging. The tooth pattern maximises velocity along a short path, which is what keeps it from silting up.
Catalog ↗

Woodpecker PC with CNL (WPC-CNL)

Spray stakes & emitters
Flow
0.53 gph (red), 1.06 gph (black), 2.25 gph (green)
Pressure
Recommended operating range 14.5–58 psi; shut-off (closing) pressure 2.17 psi, about 5 ft of head
Pressure comp.
Yes — with CNL anti-drain · Without anti-drain: Woodpecker PC (WPC)
Best for
The CNL mechanism seals the dripper once pressure drops below about 5 ft of head, so the lateral does not empty itself downhill between cycles. That stops the low end of a slope being drowned every time the system shuts off, and the next cycle starts instantly instead of refilling
Catalog ↗

Woodpecker Dripper (WP)

Spray stakes & emitters
Flow
0.5 gph (red), 1.0 gph (black), 2.0 gph (green) — colour-coded on the base
Pressure
Recommended filtration 120 mesh
Pressure comp.
No · PC version: Woodpecker PC (WPC)
Connection
Barbed inlet for easier installation; barbed outlet accepts micro-tubing
Sizes
Flow path 1.96" long — 0.028 x 0.038" at 0.5 gph, 0.047 x 0.050" at 1.0 gph, 0.055 x 0.065" at 2.0 gph
Best for
The barbed outlet takes micro-tubing, so one dripper can be run out to where the plant actually is and split to several outlets if needed. Barbed inlet pushes straight into the lateral. Turbonet flow path gives the dripper an unusually large water passage — the industry’s widest flow path and a wider cross-section — so contaminants pass straight through instead of lodging. The tooth pattern maximises velocity along a short path, which is what keeps it from silting up.
Catalog ↗

Button Dripper (BD)

Spray stakes & emitters
Flow
0.5 gph (red), 1.0 gph (black), 2.0 gph (green) — colour-coded at the outlet hole
Pressure
Recommended filtration 120 mesh
Pressure comp.
No
Connection
Barbed inlet
Sizes
Flow path 1.96" long — same three flow paths as the Woodpecker
Best for
The plain button form of the same Turbonet dripper — drips straight from the outlet hole rather than taking micro-tubing. Cheaper per point where the emitter sits right at the plant. Turbonet flow path gives the dripper an unusually large water passage — the industry’s widest flow path and a wider cross-section — so contaminants pass straight through instead of lodging. The tooth pattern maximises velocity along a short path, which is what keeps it from silting up.
Catalog ↗

PCJ On-Line Dripper

Spray stakes & emitters
Pressure comp.
Yes
Best for
Netafim’s PCJ punch-in dripper, holding flow steady along the lateral regardless of pressure. Available in CNL anti-drain form for sloping ground
Catalog ↗

PC Spray Stakes

Spray stakes & emitters
Flow
3.2, 6.6, 7.9 and 10.6 gph — colour-coded by flow
Pressure
Pressure compensating up to 60 psi
Pressure comp.
Yes · Non-PC version: Spray Stakes
Sizes
Every flow available as a 7" stake or a 12-gauge metal rod mount; single or double spray
Best for
Built for the nursery grower, and the reason is the spray pattern — it angles downward just enough to keep water on the mix instead of over the rim. Water that hits the pot wall runs down the side and straight out the bottom without wetting anything. Even distribution also activates top-dressed fertiliser uniformly. PC holds the flow steady to 60 psi, so long rows and sloping ground stay even. Single spray suits a stake at the pot edge; double wets more of the mix from the centre
Catalog ↗

Spray Stakes (Non-PC)

Spray stakes & emitters
Flow
3, 5 and 7 gph — colour-coded (5 gph green, 7 gph black)
Pressure comp.
No · PC version: PC Spray Stakes
Sizes
Single or double spray
Best for
The economical spray stake where pressure across the block is already steady. Pattern is shaped to the pot so water and fertiliser land on the mix with no overspray or run-off. Netafim put the payback plainly: hand watering a plant three seconds a day costs about $0.25 a month, so the system pays for itself before the plant is sold — and converting overhead sprinklers to low-pressure spray stakes saves over two-thirds of pumping cost. Lower flows run longer rows: 3 gph reaches 215 ft on 0.520" pipe against 145 ft for 7 gph
Catalog ↗

Primerus

Spot-Spitter

Spray stakes & emitters
Best for
The world’s leading single-container nursery sprayer — one stake per pot, no moving parts to clog
Catalog ↗

Spot-Spitter Tall

Spray stakes & emitters
Best for
Taller stake for larger containers and deeper canopies
Catalog ↗

Spot-Spitter DownSpray

Spray stakes & emitters
Best for
Down-spray pattern that keeps water off foliage and inside the pot
Catalog ↗

Antelco

Shrubbler 360° / 180°

Spray stakes & emitters
Connection
0.16" barb or 10-32 UNF thread
Best for
The original Shrubbler. Rotating the click-indexed cap changes both flow and coverage, so one part covers a range of pot sizes and you can dial a plant up or down without swapping emitters. 360° and 180° patterns
Catalog ↗

Shrubbler 360° PC

Spray stakes & emitters
Pressure comp.
Yes
Best for
Shrubbler pattern with pressure compensation, for long runs and uneven ground where an adjustable non-PC emitter would drift
Catalog ↗

PotStream

Spray stakes & emitters
Best for
Adjustable emitter aimed at pots and planter boxes — flow and coverage tuned per plant
Catalog ↗

Mini Bubbler

Spray stakes & emitters
Best for
Bubbler output for containers and basins where a spray would drift or a dripper would channel
Catalog ↗

Midi Drip Emitter

Spray stakes & emitters
Flow
1 gph and 2 gph
Best for
Fixed-flow emitter with a wide flow path, for pots, beds, shrubs, fruit trees, vines and row crops where pressure is already stable
Catalog ↗

Agri Drip PC

Spray stakes & emitters
Flow
1 gph (grey) and 2 gph (green)
Pressure comp.
Yes
Best for
PC emitter for agricultural runs — constant flow whatever the pressure does along the line
Catalog ↗

SPEC Drip PC Self-Piercing

Spray stakes & emitters
Flow
1 gph and 2 gph
Pressure comp.
Yes
Best for
Pierces the tube as it is fitted — no punch, no separate step, and no chance of a mis-sized hole leaking
Catalog ↗

CETA PC Take-Apart

Spray stakes & emitters
Flow
1 gph and 2 gph
Pressure comp.
Yes
Best for
Comes apart for cleaning rather than being replaced when it blocks — worth it on dirty water or where labour to walk the block is the real cost
Catalog ↗

Asta Drip Spike PC

Spray stakes & emitters
Flow
1 gph and 2 gph
Pressure comp.
Yes
Best for
PC emitter and spike in one, so the assembly stakes straight into the pot without a separate stake and tube
Catalog ↗

Pinch Drip PC

Spray stakes & emitters
Flow
1 gph and 2 gph
Pressure comp.
Yes
Best for
Compact PC emitter for gardens, landscaping, nurseries, vineyards, orchards and row crops
Catalog ↗

Rivulis

ClickTif On-Line Dripper

Spray stakes & emitters
Flow
1.3, 2.0, 3.0, 4.0, 8.0 and 12.0 l/h (0.34–3.2 gph)
Pressure
Minimum recommended working pressure 1 bar (14.5 psi)
Best for
Six flows from one body, with a labyrinth path that resists blocking. Maximum recommended 2.0 l/h per outlet on the 2-outlet build
Catalog ↗

E800 On-Line Dripper

Spray stakes & emitters
Flow
2.0 l/h brown, 4.0 l/h black, 8.0 l/h green, 14.0 l/h red (0.53–3.7 gph)
Best for
Colour-coded turbulent-flow dripper across four flows, the widest single-outlet range in the Rivulis on-line family
Catalog ↗

E1000 On-Line Dripper

Spray stakes & emitters
Flow
2 and 4 l/h (0.53 and 1.06 gph)
Best for
The multi-function port takes a barbed outlet, so one dripper can feed a single pot directly or run out to a distribution tube — no separate fitting
Catalog ↗

Katif PC

Spray stakes & emitters
Flow
2.3 and 3.75 l/h (0.61 and 0.99 gph)
Pressure comp.
Yes
Sizes
Side outlet and top outlet versions
Best for
Compact PC dripper in side-outlet or top-outlet form, so the tube can leave the lateral whichever way the row runs
Catalog ↗

Supertif PC / PCND

Spray stakes & emitters
Pressure comp.
Yes — PCND version also no-drain
Connection
Barbed side outlet (SOL) with conic + barb options
Best for
PC dripper with a barbed side outlet — a Rivulis design that lets the microtube leave sideways rather than off the top, which keeps the assembly low in a tight canopy. The PCND build is also no-drain, so the lateral does not empty between cycles and the next start is instant
Catalog ↗

Dramm

HighFlow 4-way Manifold

Spray stakes & emitters
Flow
(4) 16 gpm @ 40 psi
Sizes
Item 22331
Best for
Split a hose-bib 4 ways with one valve. Easy-to-use handles, swivel connection for simple positioning of the valve. Light blue handles for visibility of valve position.
Catalog ↗

2 lph Drip Assembly - 18 in.

Spray stakes & emitters
Sizes
Item PCAS2L-18 · Sizes 18 in
Catalog ↗

2 lph Drip Assembly - 24 in.

Spray stakes & emitters
Sizes
Item PCAS2L-24, PCAS2L-36, PCAS2L-48 · Sizes 24 in, 36 in, 48 in
Catalog ↗

2 lph (1/2 gph) Pressure Compensated Emitter Barbed - Black Insert

Spray stakes & emitters
Sizes
Item PCAS2L · Sizes 2 lph
Best for
2 liter per hour emitter with barbed outlet for attaching to 0.191 tubing. Offering even flow rates at variable pressures, PCAS emitters provide even water from the first to the last dripper. Our LARGER emitter body allows for a wider labyrinth that prevents clogging by letting debris pass through the emitter.
Catalog ↗

4 lph (1 gph) Pressure Compensated Emitter PressFit - Green Insert

Spray stakes & emitters
Sizes
Item PCAS4L · Sizes 4 lph
Best for
4 liter per hour emitter with barbed outlet for attaching to 0.191 tubing. Offering even flow rates at variable pressures, PCAS emitters provide even water from the first to the last dripper. Our LARGER emitter body allows for a wider labyrinth that prevents clogging by letting debris pass through the emitter.
Catalog ↗

4 lph (1 gph) Pressure Compensated Emitter Barbed - Green Insert

Spray stakes & emitters
Sizes
Item PCAS4L-B · Sizes 4 lph
Best for
4 liter per hour emitter with barrel outlet for attaching to 0.191 tubing. Offering even flow rates at variable pressures, PCAS emitters provide even water from the first to the last dripper. Our LARGER emitter body allows for a wider labyrinth that prevents clogging by letting debris pass through the emitter.
Catalog ↗

8 lph (2 gph) Pressure Compensated Emitter PressFit - Red Insert

Spray stakes & emitters
Sizes
Item PCAS8L · Sizes 8 lph
Best for
8 liter per hour emitter with barrel outlet for attaching to 0.191 tubing. Offering even flow rates at variable pressures, PCAS emitters provide even water from the first to the last dripper. Our LARGER emitter body allows for a wider labyrinth that prevents clogging by letting debris pass through the emitter.
Catalog ↗

12 lph (3 gph) Pressure Compensated Emitter PressFit - Black Insert

Spray stakes & emitters
Sizes
Item PCAS12L · Sizes 12 lph
Best for
12 liter per hour emitter with barrel outlet for attaching to 0.191 tubing. Offering even flow rates at variable pressures, PCAS emitters provide even water from the first to the last dripper. Our LARGER emitter body allows for a wider labyrinth that prevents clogging by letting debris pass through the emitter.
Catalog ↗

Barrel to barb Adaptor

Spray stakes & emitters
Sizes
Item MAN1 · Sizes 1 outlet 3mm barb
Best for
Connect barrel outlet emitters to 192 tubing with this adaptor.
Catalog ↗

2 Way Manifold

Spray stakes & emitters
Sizes
Item MAN2 · Sizes 2 outlet 3mm barb
Best for
Two-outlet manifold on 3 mm barbs — splits one dripper feed to two pots. Item MAN2; the four-outlet is MAN4.
Catalog ↗

4 Way Manifold

Spray stakes & emitters
Sizes
Item MAN4 · Sizes 4 outlet 3mm barb
Best for
Four-outlet manifold on 3 mm barbs — one dripper feeds four pots, which is what makes a multi-outlet assembly worth fitting. Item MAN4; the two-outlet is MAN2.
Catalog ↗

Slim Weight - Zinc Aluminum Alloy

Spray stakes & emitters
Sizes
Item PCASW · Sizes 11 Gram
Catalog ↗

18 in. - 0.191 in. Tubing

Spray stakes & emitters
Sizes
Item 191-18, 191-24, 191-36, 191-42, 191-48 · Sizes 18 in., 24 in., 36 in., 42 in., 48 in.
Catalog ↗

4 in. dia Pressure Compensated Dribble Ring

Spray stakes & emitters
Sizes
Item PCR4-24, PCR4-36, PCR4-48, PCR6-12, PCR6-24, PCR6-36, PCR6-48, PCR85-12, PCR85-24, PCR85-36, PCR85-48, PCR10-12 (+7 more) · Sizes 24 in. tube, 36 in. tube, 48 in. tube, 12 in. tube
Catalog ↗

Anchor Stake for Rings

Spray stakes & emitters
Sizes
Item S3ANCHOR · Sizes 6
Best for
The S3ANCHOR holds dribble rings in the pot, keeping them optimally placed for best water distribution.
Catalog ↗

T connector for Dramm PC Rings.

Spray stakes & emitters
Sizes
Item T-PIECE · Sizes -
Best for
The T-Piece has two barbed, secure connections and one smooth connection to allow for the ring to be easily disconnected.
Catalog ↗

1/4 in Microvalve

Spray stakes & emitters
Sizes
Item MTMV-25 · Sizes 1/4 in barbs
Best for
Barbed Microvalve for drip irrigation. Allows individual pressure compensated drippers to be turned off.
Catalog ↗

3mm Barbed Fitting

Spray stakes & emitters
Sizes
Item BARB3 · Sizes 3mm
Catalog ↗

45 deg. Angle Stake 4 in.

Spray stakes & emitters
Sizes
Item ST-45 · Sizes 4 in.
Catalog ↗

45 deg. Angle Labyrinth Stake 4 in.

Spray stakes & emitters
Sizes
Item LST4-45 · Sizes 4 in.
Catalog ↗

Easyclean 45 deg. Angle Labyrinth Stake

Spray stakes & emitters
Sizes
Item ECLST-45, ECLST · Sizes 4 in.
Best for
The Easyclean Labyrinth Stake places the labyrinth inside of the stake body. Simply unthread and clean to remove any debris or algae buildup. Works with any standard multi-outlet drip irrigation system
Catalog ↗

Easyloc Inline Valve

Spray stakes & emitters
Sizes
Item ITVSL16 · Sizes 16mm x 16mm
Best for
Easyloc Inline Valve 16mm x 16mm. Shuts off PE line. Insert as needed. Barb & Compression nut. Needs no additional clamp.
Catalog ↗

Easyloc Inline Valve & Fitting

Spray stakes & emitters
Sizes
Item ITV075SL16 · Sizes 16mm x 3/4in
Best for
Easyloc Inline Valve 16mm x 3/4in. MPT. Connect PVC to PE. Barb & Compression nut. Needs no additional clamp.
Catalog ↗

Easyloc Fitting

Spray stakes & emitters
Sizes
Item ITF075SL16 · Sizes 16mm x 3/4in
Best for
Easyloc Fitting 16mm x 3/4in. MPT. Connect PVC to PE. Barb & Compression nut. Needs no additional clamp.
Catalog ↗

Easyloc Tee

Spray stakes & emitters
Sizes
Item ITTSL16 · Sizes 16mm
Best for
Easyloc Tee 16mm. Barb & Compression nut. Needs no additional clamp.
Catalog ↗

Easyloc Elbow

Spray stakes & emitters
Sizes
Item ITESL16 · Sizes 16mm
Best for
Easyloc Elbow 16mm. Barb & Compression nut. Needs no additional clamp.
Catalog ↗

Easyloc Coupling

Spray stakes & emitters
Sizes
Item ITCSL16 · Sizes 16mm
Best for
Easyloc Coupling 16mm. Barb & Compression nut. Needs no additional clamp.
Catalog ↗

Figure 8 Clamp

Spray stakes & emitters
Sizes
Item 600AP8 · Sizes 16mm
Best for
Figure 8 clamp to close 16mm PE ends.
Catalog ↗

Dribble Ring for 6 & 7 Containers

Spray stakes & emitters
Sizes
Item DR4-24, DR4-36, DR4-48, DR6-12, DR6-24, DR6-36, DR6-48, DR85-12, DR85-24, DR85-36, DR85-48, DR10-12 (+7 more) · Sizes 24 in, 36 in, 48 in, 12 in, 12, 24, 36, 48 · Colors -
Catalog ↗

Strand Dripper 12lph - 18 in Tube

Spray stakes & emitters
Sizes
Item ST18-A112, ST24-A112, ST30-A116, ST42-A116, ST30-A124, ST42-A124, STP12-A208, STP18-A208, STP18-A212, STP24-A212, STP30-A216, STP42-A216 (+2 more) · Sizes 18 in, 36 in, 42 in, 30 in, 12 in, 24 in · Colors -
Best for
Strand Dripper 12 lph flow rate with 18 inch perforated tube.
Catalog ↗

Tavlit

PC Dripper Assemblies & Drip Kits

Spray stakes & emitters
Pressure comp.
Yes
Best for
Ready-made PC dripper assemblies and drip kits — dripper, tube and spike supplied together rather than assembled on the bench
Catalog ↗

Drip Spike

Spray stakes & emitters
Best for
Spike that anchors the dripper tube in the pot so it stays where it was set
Catalog ↗

Other product categories

AC Irrigation Controllers · AC Solenoid Valves · Accessories & Spare Parts · Air & Vacuum Vents · Bench & Tubing Support · Chlorination · DC & Battery Irrigation Controllers · DC Latching Solenoid Valves · Drip Tape · Dripline · Fertilizer Injectors · Filtration · Hand Watering Tools · Hanging Basket Assemblies · Hose, PVC & Fittings · Layflat Hose · Metal Impact Sprinklers · Micro-Sprinklers · Misters & Foggers · Multi-Outlet Drippers (MODS) · Oval Hose · Plastic Impact Sprinklers · Poly Tubing · Pressure Reducing Valves · Pressure Regulators · Pressure Sustaining Valves · Pumps & Pump Control · Specialized Tools · Spray & Fogging Equipment · Water Meters · Wire & Cable · Wobblers