White JetRain Barbed
Micro-sprinkler- Sizes
- Item JRLPC-B-WH · Sizes .48 gpm
- Best for
- JetRain overhead and mist nozzle, white, barbed inlet. Dramm list the white and blue at the same 0.48 gpm, with red at 0.79 gpm and yellow at 1.37 gpm — so the colour identifies the nozzle at a glance across a house rather than encoding a different flow between these two. Item JRLPC-B-WH.
Catalog ↗Blue JetRain Barbed
Micro-sprinkler- Sizes
- Item JRLPC-B-BL · Sizes .48 gpm
- Best for
- JetRain overhead and mist nozzle, blue, barbed inlet. Listed at the same 0.48 gpm as the white; red is 0.79 gpm and yellow 1.37 gpm. Item JRLPC-B-BL.
Catalog ↗Red JetRain Barbed
Micro-sprinkler- Sizes
- Item JRLPC-B-RD · Sizes .79 gpm
- Best for
- JetRain Nozzle Low Pressure with Clean Out Check Valve Barbed Inlet. For mist and irrigation.
Catalog ↗Yellow JetRain Barbed
Micro-sprinkler- Sizes
- Item JRLPC-B-YL · Sizes 1.37 gpm
- Best for
- JetRain Nozzle Low Pressure with Clean Out Check Valve Barbed Inlet. For heavier irrigation.
Catalog ↗JetRain Barbed Nozzle
Micro-sprinkler- Sizes
- Item JR-B · Sizes -
- Best for
- JetRain Nozzle Barbed with no Check Valve Barbed Inlet
Catalog ↗White JetRain Threaded
Micro-sprinkler- Sizes
- Item JRLPC-T-WH · Sizes .48 gpm
- Best for
- JetRain overhead and mist nozzle, white, threaded inlet for a fitting or riser. 0.48 gpm, the same as the blue; red is 0.79 gpm and yellow 1.37 gpm. Item JRLPC-T-WH.
Catalog ↗Blue JetRain Threaded
Micro-sprinkler- Sizes
- Item JRLPC-T-BL · Sizes .48 gpm
- Best for
- JetRain overhead and mist nozzle, blue, threaded inlet. 0.48 gpm, matching the white; red is 0.79 gpm and yellow 1.37 gpm. Item JRLPC-T-BL.
Catalog ↗Red JetRain Threaded
Micro-sprinkler- Sizes
- Item JRLPC-T-RD · Sizes .79 gpm
- Best for
- JetRain Nozzle Low Pressure with Clean Out Check Valve Threaded Inlet. For mist and irrigation.
Catalog ↗Yellow JetRain Threaded
Micro-sprinkler- Sizes
- Item JRLPC-T-YL · Sizes 1.37 gpm
- Best for
- JetRain Nozzle Low Pressure with Clean Out Check Valve Threaded Inlet. For heavier irrigation.
Catalog ↗JetRain Threaded Nozzle
Micro-sprinkler- Sizes
- Item JR-T · Sizes -
- Best for
- JetRain Nozzle Threaded with no Check Valve Threaded Inlet
Catalog ↗JetRain 180 deg Nozzle Complete Barbed
Micro-sprinkler- Sizes
- Item JRLPC180-B-x, JRLPC180-T-x, JRC180-xx, JR180-xx — specify color when ordering
- Best for
- JetRain 180 deg Pattern Barbed - Choose a color
Catalog ↗JetRain Cleanout ADV Barbed LP
Micro-sprinkler- Sizes
- Item JR-807L · Sizes -
- Best for
- Low-pressure JetRain cleanout with an automatic drain valve, barbed inlet — flushes the line and drains it down at shut-off. Item JR-807L; the threaded version is JR-808L.
Catalog ↗JetRain Cleanout ADV Threaded LP
Micro-sprinkler- Sizes
- Item JR-808L · Sizes -
- Best for
- Low-pressure JetRain cleanout with an automatic drain valve, threaded inlet. Item JR-808L; the barbed version is JR-807L.
Catalog ↗JetRain On/Off Valve
Micro-sprinkler- Sizes
- Item JRBV-750 · Sizes -
- Best for
- Add to a JetRain assembly to turn individual nozzles on and off.
Catalog ↗Pin-Perfect Nozzle
Micro-sprinkler- Sizes
- Item PPN-GN, PPN-GR, PPN-BL, PPN-RD, PPN-OR, PPN-BK · Sizes 2.65 mm, 2.75 mm, 2.80 mm, 2.95 mm, 3.05 mm, 3.25 mm · Colors Green, Grey, Blue, Red, Orange, Black
Catalog ↗360° Nifty Nozzles
Micro-sprinkler- Sizes
- Item 360NN-GN, 360NN-GR, 360NN-BL, 360NN-RD, 360NN-OR · Sizes 2.00 mm, 2.25 mm, 2.50 mm, 2.75 mm, 3.00 mm · Colors Green, Grey, Blue, Red, Orange
Catalog ↗Drop Inversion Nozzle
Micro-sprinkler- Sizes
- Item DDI-GG · Sizes 2.25 mm · Colors Grey / Grey
- Best for
- Due to a special spinning mechanism which increases the spray diameter of the Drop Inversion Nozzle, it is perfect for 24 foot wide quonset/ tunnel houses. It is used on overhead watering systems that require a larger droplet size or an extended coverage area from each nozzle. Drop Inversion Nozzles produce a 360° 24 foot diameter spray pattern and must be installed on the bottom side of the pipeline with No-Drip Extension Check Valves. To provide uniform coverage the nozzles should be spaced so that their spray patterns overlap. With the pipeline 5 feet over your crop, Drop Inversion Nozzles produce a 24 foot diameter spray pattern. Space each nozzle 12 feet apart so the spray pattern will overlap to the next nozzle. Multiple pipelines should be spaced 24 feet apart for complete coverage. To decrease the spray diameter, lower the water pipeline until the desired spray diameter is achieved. Before you begin an installation, we recommend that you install one pipeline based on the guidelines presented. After the first pipeline is installed, tested and adjusted, remaining lines can be set-up following the same specifications as the first. Use Drop Inversion Nozzles in combination with Dramm Run-Out Valves and No-Drip Extension Check Valves to control water drip.
Catalog ↗Drop Upright Nozzle
Micro-sprinkler- Sizes
- Item DDU-GB · Sizes 2.25 mm · Colors Grey / Black
- Best for
- The Drop Upright Nozzle has a unique spinning mechanism which increases the spray diameter of this nozzle to 30 feet when your water pipeline is 5 feet above the crop. It is used on overhead watering systems that require a larger droplet size or an extended coverage area from each nozzle. Drop Upright Nozzles produce a 360° 36 foot diameter spray pattern and must be installed on the topside of the pipeline or on top of 1/2 PVC risers. To provide uniform coverage the nozzles should be spaced so that their spray patterns overlap. With the pipeline 5 feet over your crop, Drop Upright Nozzles produce a 30 foot diameter spray pattern. Space each nozzle 15 feet apart so the spray pattern will overlap to the next nozzle. Multiple pipelines should be spaced 30 feet apart for complete coverage. To decrease the spray diameter, lower the water pipeline until the desired spray diameter is achieved. Before you begin an installation, we recommend that you install one pipeline based on the guidelines presented. After the first pipeline is installed, tested and adjusted, remaining lines can be set-up following the same specifications as the first. Use Drop Upright Nozzles in combination with Dramm Run-Out Valves, No-Drip Risers and No-Drip Extension Check Valves to control water drip.
Catalog ↗T-Drop Nozzle
Micro-sprinkler- Sizes
- Item TDN · Sizes 1.75 mm · Colors Brown / Red
- Best for
- The T-Drop Nozzle was created for long narrow installations in which an elliptical spray pattern is desired. T-Drop Nozzles can be installed on the topside of the pipeline, on bottom side of the pipeline or on top of 1/2 PVC risers. Bottom side installations require No-Drip Check Valves to prevent drip. To provide uniform coverage the nozzles should be spaced so that their spray patterns overlap. With the pipeline 5 feet over your crop and nozzles installed on the topside of your pipeline, T-Drop Nozzles will produce a 10 foot by 5 foot elliptical spray pattern. Space each nozzle 5 feet apart so the spray pattern will overlap to the next nozzle. Multiple pipelines should be spaced 5 feet apart for complete coverage. To increase the spray diameter of the T-Drop to 12 feet by 6 feet, install the nozzles on the bottom side of the pipeline and space the nozzles at 6 foot intervals. Multiple pipelines should be spaced 6 feet apart for complete coverage. Before you begin an installation, we recommend that you install one pipeline based on the guidelines presented. After the first pipeline is installed, tested and adjusted, remaining lines can be set-up following the same specifications as the first. Use T-Drop Nozzles in combination with Dramm Run-Out Valves, No-Drip Risers and No-Drip Extension Check Valves to control water drip.
Catalog ↗36 Pin-Perfect Hanging Nozzle Assembly
Micro-sprinkler- Sizes
- Item HNP-xx-36 · Sizes 36 inch — specify nozzle color
- Best for
- The Dramm Hanging Nozzle system combines the superior flow rates and water patterns of Dramm nozzles with the flexibility of a below basket hanging irrigation system. Designed for misting or irrigation of crops on benches or on the ground, the Hanging Nozzle system uses the familiar Dramm nozzles with our No Drip Extension Check Valve and a leader tube. Hanging nozzle systems offer solutions to the traditional problems of rigid pipe mounted irrigation systems. Hanging nozzle systems use a check valve and hang below the lateral which prevents dripping from the nozzle or the shadow, dripping from the lateral. Dramm Hanging Nozzle Assemblies offer even watering. Gravity ensures that the nozzles are plumb preventing pattern distortion. The entire assembly includes a leader tube with a barb fitting. The system uses flexible polyethylene tubing instead of PVC for ease of use and flexibility. A variety of leader tube lengths and nozzle choices are available. For flow rates see the specific nozzles. To install a Dramm Pin-Perfect Hanging Nozzle System. Space the nozzle assemblies at 3' spacings. Choose a leader tube length that places the nozzles below the hanging baskets or at a height of at least 3' above the crop. Choose a Pin-Perfect Nozzle to suit your needs taking into account the flow rate of each nozzle and the flow rate of the lateral.
Catalog ↗48 Pin-Perfect Hanging Nozzle Assembly
Micro-sprinkler- Sizes
- Item HNP-xx-48, HNP-xx-60 · Sizes 48 inch, 60 inch — specify nozzle color
Catalog ↗180° Nylon Nozzle
Micro-sprinkler- Sizes
- Item 180NY-RD · Sizes - · Colors Red
- Best for
- 180° spray pattern. Push into flexible 1/2 black poly tubing for perimeter watering. Use in conjunction with 90° Nylon Nozzle.
Catalog ↗90° Nylon Nozzle
Micro-sprinkler- Sizes
- Item 90NY-GR · Sizes - · Colors Grey
- Best for
- 90° spray pattern. Push into flexible 1/2 black poly tubing for perimeter watering. Use in conjunction with 180° Nylon Nozzle.
Catalog ↗S10 - 1/2MPT ADPT-GREEN PLATE-nozzle select
Micro-sprinkler- Sizes
- Item N-12884-11XX · Sizes - · Colors -
- Best for
- #10,11,12,13,14,15,16,17,18,20 - Green #1, Black#2, Gray#3
Catalog ↗R10 Rotator - 1/2MPT ADPT-RED PLATE-nozzle select
Micro-sprinkler- Sizes
- Item N-9913-11XX · Sizes - · Colors -
- Best for
- #40, 45, 50, 55, 60 - Red #1 , White #2, Orange #7
Catalog ↗R2000WF Rotator - 1/2MPT ADPT-BLUE PLATE-nozzle select
Micro-sprinkler- Sizes
- Item N-9928-10XX · Sizes - · Colors -
- Best for
- #10,11,12,13,14,15,16,18,20 - Blue #10, Purple #12, Green #14, Red #16, Yellow #18, Brown #20 Purple, Ivory
Catalog ↗D10 - 1/2MPT ADPT-GRN PLATE-nozzle select
Micro-sprinkler- Sizes
- Item N-12928-10XX, N-9914-13XX, N-12927-11XX, N-9929-10XX, N-13827-12XX · Sizes - · Colors -
- Best for
- #10,11,12,13,14,15,16,17,18,20 - Standard flat Black plate
Catalog ↗