ML Irrigation / Manufacturers / Dramm

Dramm

Dramm is our deepest single line, and the one greenhouse crews touch every day: water breakers and wands, hose and reels, hand-watering gear, cold foggers and backpack sprayers, dosing injectors, and the bench and tubing hardware that holds a growing-on house together. It is equipment that gets used hard, so we stock the spares and repair kits alongside the products themselves.

325 products · 14 categories · wholesale · ships nationwide

Replacement parts and service kits are listed under Accessories as well as here — if a breaker or a seal has failed, the part is usually available on its own.

Request a quote

Watering tool 40

400 Aluminum Water Breaker Nozzle

Watering tool
Flow
11.1 @ 40 PSI
Sizes
Item 400AL
Best for
The original full-flow shower head nozzle. Dramm's aluminum 400 Water Breaker provides fast, full-flow watering without damage to your plants or disturbing soil. Used and recommended daily by professional growers worldwide. Cast aluminum and hand machined with 3/4 inch brass hose threads. Invented, designed and manufactured in the U.S.A. since 1945.
Catalog ↗

170 Aluminum Water Breaker Nozzle

Watering tool
Flow
7 @ 40PSI
Sizes
Item 170AL
Best for
The 170AL Water Breaker is excellent for watering in areas with low water pressure or with systems which restrict total water volume. It is designed for small containers (hanging baskets), and when using fertilizer syphons. Adjust water flow to 50% of its possible volume. Cast aluminum with 3/4 brass hose threads. Manufactured in the U.S.A.
Catalog ↗

400PL Water Breaker Nozzle with Protective Ring

Watering tool
Flow
11.1 @ 40 PSI
Sizes
Item 72646
Best for
The 400PL With Protective Ring returns to our familiar Blue color but with the additon of our black protective ring. This ring prevents damage by absorbing and transferring blows around the disk.
Catalog ↗

400PL Water Breaker Nozzle

Watering tool
Flow
11.1 @ 40 PSI
Sizes
Item 400PL
Best for
The 400PL Water Breaker provides fast, full-flow watering without damage to your plants. Patterned after the original 400 Aluminum water breaker , the 400PL is made from high-impact ABS plastic and aluminum to provide a lightweight alternative. Used by professional growers worldwide. Made in U.S.A. 3/4 hose threads.
Catalog ↗

170PL Water Breaker Nozzle

Watering tool
Flow
7 @ 40 PSI
Sizes
Item 170PL
Best for
Patterned after the 170 Aluminum water breaker, the 170PL is an excellent choice for watering in areas with low water pressure or with systems which restrict total water volume. It is designed for small containers (hanging baskets). Adjust water flow to 50% of its possible volume. Made in the U.S.A. from ABS plastic. 3/4 hose threads.
Catalog ↗

480PL Plastic Fine Water Breaker Nozzle

Watering tool
Flow
7 @ 40 PSI
Sizes
Item 480PL
Best for
480 Plastic Water Breaker. Stainless steel disk. Micro-fine holes. Focused Pattern.
Catalog ↗

480AL Aluminum Fine Water Breaker Nozzle

Watering tool
Flow
7 @ 40 PSI
Sizes
Item 480AL
Best for
480 Aluminum Water Breaker. Stainless steel disk. Micro-fine holes. Wider pattern.
Catalog ↗

Screen-Aire Water Breaker Nozzle

Watering tool
Flow
18 @ 40 PSI
Sizes
Item 350PL
Best for
The Screen-Aire Water Breaker is designed to water nursery containers with a gentle, concentrated aerated flow of water. A fine-mesh screen and an array of internal components combine air and water to produce a very soft, unrestricted spray. Use a Dramm In-Line Hose Filter to keep the nozzle from clogging. Made in the U.S.A. 3/4 brass threads.
Catalog ↗

1000PL Water Breaker Nozzle

Watering tool
Flow
8 @ 40 PSI
Sizes
Item 1000PL, 1000PL-N, 1000PL-W
Best for
The 1000PL Redhead water breaker has over 1,000 micro holes that create an ultra-soft flower shower which will not disturb delicate soil or harm tender plants. Use with a Dramm In-Line Hose Filter to prevent clogging. Made in U.S.A. from ABS plastic and stainless steel.
Catalog ↗

750PL Fine Low Flow Water Breaker Nozzle

Watering tool
Flow
8 @ 40 PSI
Sizes
Item 750PL
Best for
The 750PL Water Breaker has 750 micro-holes for a fine pattern with a slightly reduced flow rate. The 750PL is perfect for light watering with a very soft pattern. Wider pattern.
Catalog ↗

175 micron In-Line Hose Filter

Watering tool
Flow
10 @ 40 PSI
Sizes
Item ILF-175
Best for
The Dramm In-Line Hose Filter is for use with any Dramm hose nozzle, but highly recommended for the 1000PL Water Breaker and the 350AL Screen Aire. A stainless steel 175 micron (80 mesh) screen filters out unwanted dirt and debris.
Catalog ↗

Brass Rose - 4 Diameter

Watering tool
Flow
18-20 @ 40 PSI
Sizes
Item 540B
Best for
Our Brass Rose features an extra wide spray pattern, which allows you to increase the speed of hand watering. Available in a 4-inch diameter. Great for watering bedding plants, pots or market packs. 540B includes protective rubber guard and metric to inch hose thread converter. Made in Germany with 3/4 hose threads.
Catalog ↗

Plastic Fan Nozzle

Watering tool
Flow
5-7 gpm @ 40 PSI
Sizes
Item 79001
Best for
The Dramm Plastic Fan Nozzle offers a medium flow in a rectangular pattern. Perfect for flats and plug trays.
Catalog ↗

Seedling Nozzle

Watering tool
Flow
1/2 @ 40 PSI
Sizes
Item 510
Best for
The Seedling Nozzle allows you to water fragile plants, delicate seedlings or plant cuttings. This high-quality nozzle produces an extra fine, hollow cone mist pattern and sprays 1/2 gallon of water per minute. Made in the U.S.A. from solid brass. 3/4 hose threads.
Catalog ↗

Adjustable Hose Nozzle

Watering tool
Flow
Variable
Sizes
Item 800
Best for
Our Adjustable Hose Nozzle is great for cleaning walkways, benches, equipment... just about anything! Twist the barrel to adjust the water pattern from a fine, cone-shaped spray to a powerful stream. Twist the barrel back and the water is off. Manufactured in the U.S.A. from brass. 3/4 hose threads.
Catalog ↗

Handi-Grip Handle

Watering tool
Sizes
Item 106-G
Best for
The Handi-Grip Handle provides comfort when watering directly from your hose. It is also perfect for using with the Brass Rose or any of the Dramm Water Breakers. The six inch long grip is encased in a padded foam grip. Made in the U.S.A. from aluminum and brass. 3/4 male and female hose threads.
Catalog ↗

Handi-Reach Handle

Watering tool
Sizes
Item 116-G
Best for
Handi-Reach Handles are designed to eliminate the stretching and stooping associated with hand watering. Available in 16, 24, 30, 36, 48, 60 and 72-inch lengths, these rugged tools allow you to water hard-to-reach areas with ease. Made in the U.S.A. from extruded aluminum tubing, forged brass hose couplings and a comfort EPDM hand grip. 3/4 male and female hose threads.
Catalog ↗

36 Hanging Basket Handle

Watering tool
Sizes
Item 136-GB
Best for
Hanging Basket Handles offer a 90° curve in the top of handle so you can water directly into a hanging basket. Available in 36 and 48-inch lengths, Use with any 170 series Water Breaker to water hanging baskets and window boxes. Made in the U.S.A. from extruded aluminum tubing, forged brass hose couplings and a comfort EPDM hand grip. 3/4 male & female hose threads.
Catalog ↗

48 Hanging Basket Handle

Watering tool
Sizes
Item 148-GB
Catalog ↗

Handi-Reach Color Handle

Watering tool
Sizes
Item 116-GCM, 124-GCM, 130-GCM
Best for
Upgrade to our colorized Handi-Reach Handles. These are the same heavy-duty extension handles as noted above, except they have a super comfortable foam hand grip and come in the color of your choice. Six bright colors are available in 16, 24 or 30-inch lengths. Choose from Red (RD), Orange (OR), Yellow (YL), Green (GN), Blue (BL) or Berry (BY)
Catalog ↗

24 Handi-Reach Handle

Watering tool
Sizes
Item 124-G, 124-GB, 130-G, 136-G, 148-G, 160-G, 10-12370, 22375, 22376
Catalog ↗

QAV Shut-Off Valve

Watering tool
Flow
13 gpm
Sizes
Item 72318
Best for
The QAV Valve is designed as a high-quality, lower-cost valve. Made in the USA, the QAV uses a unique, patent-pending design to improve strengh and quality while reducing assembly labor.
Catalog ↗

Twin Shut-Off Valve

Watering tool
Flow
11 gpm
Sizes
Item 235
Best for
Water two places at one time with the 235 Twin Shut-Off Valve! Connect the valve to your faucet to create two male connections-- with each connection independently controlled. A quarter turn of the handle and the water flow is shut off. Molded from high quality ABS plastic. 3/4 male and female hose threads.
Catalog ↗

Brass Twin Shut-Off Valve

Watering tool
Flow
10 gpm
Sizes
Item 235B
Best for
Water two places at one time with the 235 Brass Twin Shut-Off Valve! Connect the valve to your faucet to create two male connections-- with each connection independently controlled. A quarter turn of the handle and the water flow is shut off. Cast brass with a female swivel for easy attachment.
Catalog ↗

Heavy Duty Plastic Shut-Off Valve

Watering tool
Flow
18 gpm
Sizes
Item 74
Best for
The 74 Shut-off valve is made from glass filled polypropylene to be very durable and corrosion resistant. More durable than other plastic valves, the 74 is lightweight and offers a full flow.
Catalog ↗

300 Brass Shut-Off Valve

Watering tool
Flow
17 gpm
Sizes
Item 10-73300
Best for
Simply the best shut-off valve available. Dramm's #300 Brass Shut-Off Valve provides fingertip water control at the end of your greenhouse hose. A quarter turn of the large ergonomic handle and the water is off. Full water flow design. Made in the USA from brass, durable seals and a hard chrome plated ball to provide years of service. 3/4 threads.
Catalog ↗

300 Brass Shut-Off Valve w Raised Handle

Watering tool
Flow
17 gpm
Sizes
Item 10-73302
Best for
Our durable Brass Shut Off but with a raised handle so that it can clear obstructions such as the brass Twisty Quick
Catalog ↗

Aluminum Shut-Off Valve

Watering tool
Flow
17 gpm
Sizes
Item 300AL
Best for
The 300AL is exactly the same as the 300 Brass, but made from machined aluminum. Lighter weight that its cousin, it is just as durable. Depending on water quality and other fittings used, corrosion may result.
Catalog ↗

Touch N' Flow Pro

Watering tool
Flow
11 gpm max
Sizes
Item 65
Best for
The 65 Touch N'Flow Pro Trigger Valve offers durability and high flow in a trigger valve. With 11 gpm output and a long life, the 65 TNF Pro allows for flexibility when watering.
Catalog ↗

2 Liter Watering Can

Watering tool
Sizes
Item B2L
Best for
The unique spout design and excellent balance make this watering can perfect for indoor use. Houseplant watering is easy with the far reaching spout. Two liter (1/2 gallon) capacity. Complete with a detachable plastic rose. Made from high-grade, durable plastic in red, yellow, green, and blue. Made in USA.
Catalog ↗

5 Liter Watering Can

Watering tool
Sizes
Item B5L
Best for
Our 5 liter watering can features an extra long spout with a brass rose. The rain-like water pattern arches upward and softly falls upon plants. This gentle sprinkle is unequaled for applying fertilizer to foliage. Detachable brass rose included. Available in red, yellow, green, and blue. 1 1/3 gallon capacity. Made in USA.
Catalog ↗

7 Liter Watering Can

Watering tool
Sizes
Item B7L
Best for
Designed for and used by professional growers for over 100 years. Now manufactured from 1/8 injection molded plastic so they won't rust, leak or corrode. Available in red, yellow, green, and blue. Perfectly balanced for indoor and outdoor use. Comes standard with large plastic rose. 1 3/4 gallon capacity.
Catalog ↗

10 Liter Watering Can

Watering tool
Sizes
Item B10L
Best for
Our largest watering can holds over 2 gallons and is engineered for years of use. A detachable angle spout ensures that your plants receive water where you want it. Perfect for Interior Plantscape professionals. Roses sold separately. Available in red and green. 2 1/2 gallon capacity. Made in Switzerland
Catalog ↗

One Touch Valve

Watering tool
Flow
8 gpm @ 40 psi
Sizes
Item 14700
Best for
The One Touch Valve offers thumb-tip control of your water flow. With 8 gpm output and a long life, the OneTouch Valve offers flexibility when watering.
Catalog ↗

OneTouch HighFlow Valve

Watering tool
Flow
16 gpm @ 40 psi
Sizes
Item 74800
Best for
The OneTouch HighFlow valve offers the same, fingertip control of your watering, but with up to 16 gpm.
Catalog ↗

HighFlow Valve

Watering tool
Flow
16 gpm @ 40 psi
Sizes
Item 22329
Best for
The HighFlow Valve utilizes our unique OneTouch features to increase flow, ease-of-use and connections.
Catalog ↗

Twin HighFlow Valve

Watering tool
Flow
(2) 16 gpm @ 40 psi
Sizes
Item 22320
Best for
The HighFlow Twin utilizes our unique OneTouch design to make spliting water flow from a hose bib easier. A swivel connection makes positioning the valve easy. Large handles make on/off simple.
Catalog ↗

Floraplus 2 72 in

Watering tool
Sizes
Item FP2-72X100, FP3-72X100, FP2-48X100, FP3-48X100, FP2-96X100 · Sizes 72 in, 48 in, 96 in · Colors -
Best for
Floraplus 2 (1L/m2 - cap mat & PP ground cover) 72 x 100' Roll
Catalog ↗

Vivaplus 2 72 in

Watering tool
Sizes
Item VP2-72X100, VP3-72X100, VP2-48X100, VP3-48X100, VP2-96X100 · Sizes 72 in, 48 in, 96 in · Colors -
Best for
Vivaplus 2 (3L/m2 - cap mat & PP ground cover)) 72 x 100' Roll
Catalog ↗

Aquafol Filter Cloth 79in

Watering tool
Sizes
Item AFW-79X164, AFW-48X100 · Sizes 79 in, 48 in · Colors -
Best for
Aquafol Filter Cloth - White 79 x 164' Roll
Catalog ↗

Accessory 45

In-Line Wand Filter Element

Accessory
Flow
element only · 8 @ 40 PSI
Sizes
Item ILFE-175, ILF-080, ILFE-080
Best for
175 micron element for the ILF-175.
Catalog ↗

300 Handle Repair Kit

Accessory
Sizes
Item RK-HRK
Best for
The Handle repair kit replaces the forged handle and includes the valve stem, nyloc nut and stem washer.
Catalog ↗

300 Full Repair Kit

Accessory
Sizes
Item RK-BB
Best for
The Full repair kit replaces all internal components and the handle.
Catalog ↗

Blue Universal Washer

Accessory
Sizes
Item 72999
Best for
Our Blue Universal Washers are a durable replacement washer for any hose fitting. Replace your washer anytime a hose-end connection starts to leak. Each bag contains 100 washers.
Catalog ↗

2 Liter Replacement Rose

Accessory
Sizes
Item 2LR-xx — specify color code: Red (RD), Yellow (YL), Green (GN), Blue (BL)
Best for
Replacement roses and elbows for Dramm Watering Cans. Specify color code when ordering: Red (RD), Yellow (YL), Green (GN), Blue (BL)
Catalog ↗

5 Liter Replacement Rose

Accessory
Sizes
Item 5LR-xx, 7LR-xx, 10LR-xx, 10LS-xx — specify color code: Red (RD), Yellow (YL), Green (GN), Blue (BL)
Catalog ↗

DrammPress 5/8 Jaws

Accessory
Sizes
Item DP-J625, DP-J750
Best for
Choose either jaw size to fit Dramm ColorStorm hoses. Either jaw fits the DrammPress (sold separately).
Catalog ↗

Dramm 5 Point Pivot Bracket

Accessory
Sizes
Item 17405
Best for
The 5 Point Pivot Bracket replaces the existing mounting bracket for the Dramm Heavy Duty Hose Reel allowing the reel to pivot 180° and be positioned in one of 5 positions: 0°, 45°, 90°, 135° & 180°.
Catalog ↗

Air Kit for SLVH and LVH

Accessory
Sizes
Item AF-AIRKIT · Sizes 120 or 220 volt
Best for
The Autofog AirKit is used to connect a fogger head to a customer supplied air compressor and includes a 24v solenoid, an air filter and regulator. The AirKit allows a user to mount their fogger head permanently in the greenhouse. Requires separate control, such as a climate control computer.
Catalog ↗

Stainless Steel Nozzle for MLVH and SLVH Autofog

Accessory
Sizes
Item J753A2 · Sizes 45 ml/min
Best for
For the application of corrosive chemicals with the Autofog. Replaces the standard brass nozzle. Available for all Autofog sizes.
Catalog ↗

Stainless Steel Nozzle for LVH and DLVH Autofog

Accessory
Sizes
Item J754B2 · Sizes 55 ml/min
Catalog ↗

Autofog Annual Maintenance Kit

Accessory
Sizes
Item AF-AMK-xx · Sizes — specify unit: ML, SL or LV
Best for
The Autofog Annual Maintenance Kit includes a collection of components that should be replaced on the Autofog units annually. The kit includes O-Rings and a replacement solution line for the nozzle, an air filter for the compressor and easy to use instructions on how to replace each part as well as calibrate your Autofog nozzle for the next season. Please specify the model when ordering. (ML, SL or LV)
Catalog ↗

Bigfoot Upgrade

Accessory
Sizes
Item — not published by Dramm · Fits CFAR-20 and CFAR-50 Coldfoggers
Best for
The Bigfoot upgrade replaces the Coldfogger's solid rubber wheels and casters with 15 pneumatic wheels and pneumatic casters. This is available on both the CFAR-20 and CFAR-50 versions.
Catalog ↗

K-30 Dual Start Conversion Kit

Accessory
Sizes
Item K-30 DS Conversion · Sizes -
Best for
Convert any K-30/20 to Dual Start. Kit includes instructions for installation. Dramm can also upgrade your unit if sent in for repair
Catalog ↗

K-30/20 Cart

Accessory
Sizes
Item K-30/20C · Sizes -
Best for
For K-30/20 PulsFOG machines. Can handle two 55 liter tanks. Allows for height adjustment and includes handle to turn PulsFOG.
Catalog ↗

K-30/20 Big-Foot Cart

Accessory
Sizes
Item K-30/20C-BF · Sizes -
Best for
Same as K-30/20C but with Big-Foot pneumatic tires and casters.
Catalog ↗

PulsFOG Accessories

Accessory
Sizes
Item Accessories · Sizes -
Catalog ↗

5 Liter Chemical Tank

Accessory
Sizes
Item K-05LCT, K-10LCT, K-55LNR, K-CF, K-GP, K-EP, K-CHP, K-CST, 149 · Sizes 5 liter, 10 liter, 55 liter, -
Catalog ↗

Herbaflex Spray Shield

Accessory
Sizes
Item 5171A · Sizes 4-20 in
Catalog ↗

Nozzle Orifice for MS-TG Spray Gun

Accessory
Sizes
Item 115427 · Sizes 0.5 gpm
Best for
Nozzle tip for MS-TG Spray Gun. Replace regularly for best results.
Catalog ↗

Nozzle Core for MS-TG Spray Gun

Accessory
Sizes
Item 585338 · Sizes --
Best for
Diffuser for MS-TG Spray Gun. Replace regularly for best results.
Catalog ↗

MSO Pressure Gauge Kit

Accessory
Sizes
Item MPG-KIT · Sizes 0-1500 psi
Best for
Upgrade your MSO with a gauge for more precise measurement of pressure. Kit includes fittings and T and is meant to be placed on the pressure output of the pump, before the hose.
Catalog ↗

1.0 mm Nozzle Tip

Accessory
Sizes
Item MS40-TG10 · Sizes 1.0 mm
Catalog ↗

Drench Adaptor for Hydra Sprayer

Accessory
Sizes
Item MS40-DA · Sizes 24 in
Best for
The Dramm Drench Adaptor works with the Hydra line of sprayers to offer drenching capabilities with a familiar tool. Consisting of a 24 Aluminum Handi-Reach Handle, a 170AL Water Breaker Nozzle, a Dramm 300 Brass Shut-Off Valve and a male, stainless steel quick connect, the Drench Adaptor allows a quick switch to drenching from spraying.
Catalog ↗

Extension Lance

Accessory
Sizes
Item L-5TQC · Sizes 0.5 gpm
Best for
5 jet spray lance with trigger for MSO, CS-5AGS, MS-GAS, Hydra or BP-4. Provides a fine spray perpendicular to the wand. Great for extended reach applications like hanging baskets, wide benches or vertical crops. 1/4 turn valve provides flow control while trigger is an easy on/off. Compressed 28 in, extends to 41 in. Fixed lance widths available in 24, 36, 42 and 48 lengths.
Catalog ↗

Single Fan Nozzle for BP-4

Accessory
Sizes
Item 112866 · Sizes 0.3 gpm
Best for
Single fan nozzle and body for the BP-4 / BP-4Li Backpack Sprayer. Allows for more precise control of chemical applications.
Catalog ↗

Twin Nozzle for BP-4

Accessory
Sizes
Item BP4-TN · Sizes 0.5 gpm
Best for
Twin nozzle bar with coarse spray for sprenching and herbicide application.
Catalog ↗

TracFOG Single Nozzle Extension

Accessory
Sizes
Item TF-EXT · Sizes 24 Length
Best for
The TracFOG nozzle extensions attach to the nozzle base to extend the length of the nozzle by 24. This allows for the nozzle outlet to be placed closer to openings in doorways for fogging of difficult areas for tractors to enter.
Catalog ↗

Cordset for 12v Operation of AAB120V

Accessory
Sizes
Item AAB12VCORD · Sizes 5' cord
Best for
For use with the AAB120V Aeration Bucket. Replaces the 120v transformer included with the AAB120V and connects to a 12VDC battery (not included) to convert to bucket to battery power. For use with customer provided 12VDC battery of any size to allow for use uncorded.
Catalog ↗

8 in dia Hanging Basket Remover Ring

Accessory
Sizes
Item R-HB-8C, R-HB-10C, R-HB-12C, HBRP-3, HBRP-5, HBRP-7 · Sizes 8 in Ring, 10 in Ring, 12 in Ring, 36 in Rod, 60 in Rod, 84 in Rod · Colors Silver, Aluminum
Best for
Hanging Basket Remover Ring 8 in diameter only
Catalog ↗

ColorPoint Holster

Accessory
Sizes
Item 19010 · Sizes Compact · Colors Black
Best for
Fits Compact Shear and Pruner. Clips to belt. Leatherette base to protect blade.
Catalog ↗

Replacement Nozzle for JetFog

Accessory
Sizes
Item JF-525 · Sizes -
Best for
Replacement nozzle tip for JetFog nozzle. Press-fit connection.
Catalog ↗

Blank Nozzle for JetFog

Accessory
Sizes
Item JF-524 · Sizes -
Best for
Blank nozzle tip to prevent spray from any JetFog outlet. Press-fit connection.
Catalog ↗

Replacement ADV Diaphragm for JetFog

Accessory
Sizes
Item JF-560 · Sizes -
Best for
Replacement diaphragm for JetFog Anti Drip Device. Silicone. Use JF-WRENCH-C to access diaphragm and reseat new diaphragm.
Catalog ↗

JetFOG Nozzle Service Kit

Accessory
Sizes
Item JF-KIT · Sizes kit
Best for
Includes JF-WRENCH & BLANK tool, 10 BLANK6, 5 JF-525, 3 JF-524, 5 JF-560
Catalog ↗

JetFOG Wrench Tool w/ JetFOG Seat Tool

Accessory
Sizes
Item JF-WRENCH-C · Sizes -
Best for
Combo set for disassembling and reassembling JetFOG nozzles easily.
Catalog ↗

JetRain Replacement Pin (specify color)

Accessory
Sizes
Item JR-P-xx — specify color when ordering
Best for
Replacement pin are specific to each nozzle. Please specify color when ordering.
Catalog ↗

3mm Plug for mistakes

Accessory
Sizes
Item BLANK3 · Sizes 3mm
Best for
Plug for mistakes when using the 3mm barbed fitting.
Catalog ↗

3mm Replacement blade for PUNCH1650

Accessory
Sizes
Item PUNCH1650-B · Sizes 3mm
Best for
Replaces standard blade when worn.
Catalog ↗

Pin-Perfect Nozzle Replacement Pin

Accessory
Sizes
Item PPNP-360 · Sizes - · Colors -
Best for
Replacement pin for the Pin-Perfect Nozzle. The color of the pin designates the nozzle output rate. Replace pins with the same color as the original pin color. The diameter of the orifice in the black body of the Pin-Perfect Nozzle determines the flow rate for that nozzle. All pins have the same diameter and do not affect flow rate. Specify two letter color code when ordering.
Catalog ↗

180° Pin-Perfect Nozzle Pin

Accessory
Sizes
Item PPNP-180 · Sizes - · Colors -
Best for
The Dramm 180° Pin replaces any color pin on the Pin Perfect Nozzles. This allows for a 180° pattern without changing nozzles. As the flow rate for the Pin Perfect Nozzle is controlled by the diameter of the nozzle body. The 180° Pin offers a 180° pattern without changing the flow. Color: black.
Catalog ↗

Assembly Insert

Accessory
Sizes
Item AI · Sizes - · Colors -
Best for
An Assembly Insert is a threaded gasket that provides a quick installation and leak-free seal for Dramm Irrigation Nozzles. The interior female thread is 3/8 Whitworth, the same thread specification used on the Pin-Perfect, Nifty, Misty Mist and Drop style nozzles. To Install, use a 7/16 drill bit to drill holes into schedule 40 PVC pipe, aluminum pipe or galvanized pipe. Caution: Do not use schedule 80 PVC. The Assembly Insert will not be able to create an effective seal due to the wall thickness of the schedule 80 PVC pipe. Install the Assembly Insert into the hole and then screw in the nozzle. The width of the nozzle expands the Assembly Insert as it is screwed into place, creating a leak-free seal without having to drill and tap every hole. Pipes should be clamped and drilled using a drill press or alignment jig to ensure perfectly round holes and straight alignment. Recommended for use at operating pressures up to 50 PSI.
Catalog ↗

Nozzle Plug

Accessory
Sizes
Item PLUG · Sizes Universal · Colors White
Best for
Oops! Did you drill one too many holes? Use the Dramm Nozzle Plug to cap off unwanted holes without replacing entire pipelines. Install as you would any other Dramm Nozzle or unscrew the unwanted Pin-Perfect, Nifty or Misty Mist Nozzle and simply replace it with the Nozzle Plug. Order a few extra, we won't tell. Item Number: PLUG
Catalog ↗

Gauge Needle Adaptor X Barb (5 pack)

Accessory
Sizes
Item GN3020-B, GN3020-T, GN3021-025 · Sizes barb, 1/4 in MIPT, 1/4 in FIPT · Colors -
Best for
Barbed Adaptors to test PE Line pressures
Catalog ↗

Road Guard- Orange (R2000WF, R2000LP)

Accessory
Sizes
Item N-12213-001 · Sizes - · Colors -
Catalog ↗

Hose & fittings 26

Brass Hose Swivel

Hose & fittings
Flow
18 gpm
Sizes
Item 72700
Best for
The Brass Hose Swivel is a live swivel that allows for unencumbered movement between the hose and attachements under pressure. Reduces hose twisting.
Catalog ↗

Hose Protector

Hose & fittings
Sizes
Item HP-625
Best for
The Hose Protector saves hose ends from unnecessary stress and strain. Utilizing a spring wound around a short length of hose, the Hose Protector connects between the faucet and your hose to prevent hose-end kinking and damage to hose couplings. This handy tool is made from zinc plated steel and heavy-duty, nickel plated brass. The Hose Protector has a 5/8 inch inside diameter. 3/4 inch male & female hose threads.
Catalog ↗

Hose Extender

Hose & fittings
Sizes
Item HE-625
Best for
The Hose Extender is a flexible 24 extension of your hose which can be used with any Dramm water tool. Great for hand watering! Just place our Brass Shut-Off on one end and a 400 Water Breaker on the other. Made in the U.S.A. from reinforced synthetic rubber and heavy-duty brass 3/4 connections. 5/8 inside diameter.
Catalog ↗

Brass Twisty Quick 5/8

Hose & fittings
Sizes
Item 625
Best for
The 625 and 675 Twisty Quick are 1/4 turn quick disconnects with hose barb fittings for use with blunt cut hoses. Secure hose to the fitting with a hose clamp (not provided). Can be used in any combination with 775M and 775F Twisty Quick. Made in Germany from forged brass. Order item 625 for 5/8 ID hose or item 675 for 3/4 ID hose.
Catalog ↗

Brass Twisty Quick 3/4

Hose & fittings
Sizes
Item 675
Catalog ↗

Threaded Brass Twisty Quick - Male

Hose & fittings
Sizes
Item 775M
Best for
The 775M & 775F Twisty Quick are 1/4 turn Quick Disconnects. Makes any threaded hose connection easy to couple/uncouple. Can be used in any combination with 625 & 675 Twisty Quick. Made in Germany from forged brass. 775M - 3/4 male hose thread, 775F - 3/4 female hose thread.
Catalog ↗

Threaded Brass Twisty Quick - Female

Hose & fittings
Sizes
Item 775F
Catalog ↗

Twisty Quick

Hose & fittings
Sizes
Item 710
Best for
Twisty Quick-- plastic quick connect hose adapter. Full water flow design. Our patented design is made from heavy-duty plastic. 3/4 male and female hose threads. Sold as a pair only.
Catalog ↗

Brass Quick Disconnect

Hose & fittings
Sizes
Item 740
Best for
The 740 Brass quick connects offer full flow without water-stop. Made in the USA.
Catalog ↗

ColorStorm Professional Rubber Hose

Hose & fittings
Sizes
Item -
Catalog ↗

ColorStorm Hose 5/8 in 50 ft

Hose & fittings
Sizes
Item 17003, 17203, 17303, 17999, 17013, 17213, 17313, 17989
Catalog ↗

Nickel Plated, Machined Brass Hose Fittings for ColorStorm Hose

Hose & fittings
Sizes
Item -
Catalog ↗

Male 5/8 Nickel Plated Brass Fitting

Hose & fittings
Sizes
Item MCP20123
Catalog ↗

Female 5/8 Nickel Plated Brass Fitting

Hose & fittings
Sizes
Item MCP20248
Catalog ↗

Male 3/4 Nickel Plated Brass Fitting

Hose & fittings
Sizes
Item MCP20124
Catalog ↗

Female 3/4 Nickel Plated Brass Fitting

Hose & fittings
Sizes
Item MCP20249
Catalog ↗

5/8 Ferrule - brass

Hose & fittings
Sizes
Item 19242
Catalog ↗

3/4 Ferrule - brass

Hose & fittings
Sizes
Item 19178
Catalog ↗

DrammPress Frame

Hose & fittings
Sizes
Item DP-FRAME
Best for
The DrammPress fits Dramm ColorStorm hose with our professional fittings by hand or using a cordless drill. The Dramm Crimper can be fitted with either 5/8 or 3/4 jaws (sold separately). Works with all Dramm ColorStorm fittings and ferrules.
Catalog ↗

Fitting/Ferrule Set 5/8 in Male 12 pk

Hose & fittings
Sizes
Item 10-17810
Best for
Fitting and Ferrule set for use with the DrammPress Hose Crimper and ColorStorm Hose
Catalog ↗

Fitting/Ferrule Set 5/8 in Female 12 pk

Hose & fittings
Sizes
Item 10-17815
Catalog ↗

Fitting/Ferrule Set 3/4 in Male 12 pk

Hose & fittings
Sizes
Item 10-17820
Catalog ↗

Fitting/Ferrule Set 3/4 in Female 12 pk

Hose & fittings
Sizes
Item 10-17825
Catalog ↗

Splice/Ferrule Set 5/8 in 12 pk

Hose & fittings
Sizes
Item 10-17830, 10-17840
Catalog ↗

Dramm Heavy-Duty Hose Reel

Hose & fittings
Sizes
Item 17400
Best for
The Heavy-Duty Hose Reel provides durable hose management without kinks or twists. Easy to wind and unwind, the reel comes with an adjustable brake to prevent freewheeling and convex sides that prevents pinching against the sides of the reel. A rigid mount and stainless steel axle ensure that there is no flexing or bouncing under the weight of the hose filled with water.
Catalog ↗

Heavy-Duty Hose Guide

Hose & fittings
Sizes
Item 17410
Best for
The galvanized steel hose guide provides easy hose management, keeping hoses in the aisle and preventing them from knocking over plants. The 6 nylon roller eases hose pulling by reducing resistance.
Catalog ↗

Mister & fogger 13

Fogg-It Nozzle - Super Super Fine

Mister & fogger
Flow
1/4 GPM @ 40 {PSI
Sizes
Item 610SSF
Best for
The Fogg-It Nozzle is designed for misting delicate seedlings or for raising humidity around wilting plants. This nozzle has three mist jets which create a conical spray pattern. Available in 4 different discharge rates. Made in the U.S.A. from solid brass. 3/4 hose threads. Available in 4 different flow rate sizes.
Catalog ↗

Fogg-It Nozzle - Super Fine

Mister & fogger
Flow
1/2 GPM @ 40 PSI · 1 GPM @ 40 PSI · 2 GPM @ 40 PSI · 4 GPM @ 40 PSI
Sizes
Item 610SF, 610F, 610L, 610H
Catalog ↗

JetFog Barbed Nozzle

Mister & fogger
Sizes
Item JFSB · Sizes -
Best for
JetFog low-pressure fog nozzle with a barbed inlet, for pushing straight onto tube. Item JFSB — order JFST instead if the line is threaded.
Catalog ↗

JetFog Threaded Nozzle

Mister & fogger
Sizes
Item JFST · Sizes -
Best for
JetFog low-pressure fog nozzle with a threaded inlet, for screwing into a fitting or riser. Item JFST — order JFSB instead for barbed tube.
Catalog ↗

JetFog 2 way Barbed

Mister & fogger
Sizes
Item JFB2 · Sizes -
Best for
Two outlet nozzle with barbed inlet. Flow rate is 11.6 lph (3 gph).
Catalog ↗

JetFog 4 way Barbed

Mister & fogger
Sizes
Item JFSB4 · Sizes -
Best for
Four outlet nozzle with barbed inlet. Flow rate is 23.2 lph (6 gph).
Catalog ↗

JetFog 5 way Barbed

Mister & fogger
Sizes
Item JFSB5 · Sizes -
Best for
Five outlet nozzle with barbed inlet. Flow rate is 29 lph (7.5 gph).
Catalog ↗

JetFog 4 way Threaded

Mister & fogger
Sizes
Item JFST4 · Sizes -
Best for
Four outlet nozzle with threaded inlet. Flow rate is 23.2 lph (6 gph).
Catalog ↗

JetFog 5 way Threaded

Mister & fogger
Sizes
Item JFST5 · Sizes -
Best for
Five outlet nozzle with threaded inlet. Flow rate is 29 lph (7.5 gph).
Catalog ↗

2 way cross for JetFog

Mister & fogger
Sizes
Item JF-2CROSS · Sizes -
Best for
Two way cross for JetFog Nozzle. Press fit connection.
Catalog ↗

4 way cross for JetFog

Mister & fogger
Sizes
Item JF-4CROSS · Sizes -
Best for
Four way cross for JetFog Nozzle. Press fit connection.
Catalog ↗

Misty Mist Nozzle

Mister & fogger
Sizes
Item MM-RW, MM-KW · Sizes 1.25 mm, 1.50 mm · Colors Red / White, Black / White
Catalog ↗

High Pressure Misty Mist Nozzle

Mister & fogger
Sizes
Item HP-GW · Sizes 0.75 mm · Colors Grey / White
Best for
The High Pressure Misty Mist delivers an ultra fine spray, ideal for mist cooling and raising humidity levels. These nozzles create a 10 foot diameter spray pattern. High Pressure Misty Mist Nozzles should only be installed on the topside of the pipeline. Bottom side installations are not recommended due to the high pressures involved. Space nozzles 10 feet apart with the pipeline suspended as high as possible in the middle of each bay, without interfering with the spray pattern of the nozzle. There is no need to worry about overlapping spray patterns since the goal is to evaporate water into the air versus allowing the water to drop to the soil. Please note that high pressure pumps and filtration equipment are required for these nozzles to work properly. High Pressure Misty Mist Nozzles can not be installed using Assembly Inserts. Threads must be tapped directly into the water pipeline, use the drill & tap installation method explained at the end of this section. Before you begin an installation, we recommend that you install one pipeline based on the guidelines presented. After the first pipeline is installed, tested and adjusted, remaining lines can be set-up following the same specifications as the first. Use High Pressure 360° Misty Mist Nozzles in combination with Dramm Run-Out Valves to control water drip.
Catalog ↗

Fertilizer injector 6

Syphonject

Fertilizer injector
Flow
7 @ 40 PSI
Sizes
Item 22624
Best for
Syphonject - plastic siphon mixer. Our 20:1 ratio feeder syphons solution using a pressure drop created by the passing stream of water. The Syphonject is made from glass filled polypropylene and is very durable as well as corrosion resistant. An external check valve ensures that water does not fill the solution source and is easy to replace. The Syphonject is perfect for fertilizing and cleaning.
Catalog ↗

Ferticart 20 gallon

Fertilizer injector
Sizes
Item FC20-DT · Sizes 20 gallon
Best for
20 gallon Injector cart with corrosion free vinyl dipped cart for Dosatron injectors
Catalog ↗

Ferticart 3 - 7 gallon

Fertilizer injector
Sizes
Item FC3X7-DT · Sizes 3 - 7gallon
Best for
The FC3X7 offers three separate 7 gallon tanks, plumbed to allow easy switching between different solutions.
Catalog ↗

Ferticart 100 Gallon with Agitation

Fertilizer injector
Sizes
Item FCST100-A · Sizes 100 gallon
Best for
The FCST100-A Ferticart offers battery operated agitation in a larger format. Battery lasts from 8-12 hours with normal use. Versions available to fit the Dosatron D45 and D8R range of injectors.
Catalog ↗

Ferticart 50 Gallon with Aeration/Agitation for the D40 Injector

Fertilizer injector
Sizes
Item FC50-A-D40 · Sizes 50 Gallon
Best for
The FC50-A-D40 offers 50 gallons of stock solution and larger plumbing for use with the D40 Dosatron injector for up to 40 gpm. The FC50-A has AC powered agitation using our specialized agitation bar and a 5 gpm pump. Finally, the Ferticart has air injection to aerate the stock solution to help keep nematodes happy as they wait for application.
Catalog ↗

Ferticart 50 Gallon with Aeration/Agitation for the D45 Injector

Fertilizer injector
Sizes
Item FC50-A-D45 · Sizes 50 Gallon
Best for
The FC50-A-D45 offers 50 gallons of stock solution and larger plumbing for use with the D45 Dosatron injector for up to 20 gpm. The FC50-A has AC powered agitation using our specialized agitation bar and a 5 gpm pump. Finally, the Ferticart has air injection to aerate the stock solution to help keep nematodes happy as they wait for application.
Catalog ↗

Spray stakes & emitters 30

HighFlow 4-way Manifold

Spray stakes & emitters
Flow
(4) 16 gpm @ 40 psi
Sizes
Item 22331
Best for
Split a hose-bib 4 ways with one valve. Easy-to-use handles, swivel connection for simple positioning of the valve. Light blue handles for visibility of valve position.
Catalog ↗

2 lph Drip Assembly - 18 in.

Spray stakes & emitters
Sizes
Item PCAS2L-18 · Sizes 18 in
Catalog ↗

2 lph Drip Assembly - 24 in.

Spray stakes & emitters
Sizes
Item PCAS2L-24, PCAS2L-36, PCAS2L-48 · Sizes 24 in, 36 in, 48 in
Catalog ↗

2 lph (1/2 gph) Pressure Compensated Emitter Barbed - Black Insert

Spray stakes & emitters
Sizes
Item PCAS2L · Sizes 2 lph
Best for
2 liter per hour emitter with barbed outlet for attaching to 0.191 tubing. Offering even flow rates at variable pressures, PCAS emitters provide even water from the first to the last dripper. Our LARGER emitter body allows for a wider labyrinth that prevents clogging by letting debris pass through the emitter.
Catalog ↗

4 lph (1 gph) Pressure Compensated Emitter PressFit - Green Insert

Spray stakes & emitters
Sizes
Item PCAS4L · Sizes 4 lph
Best for
4 liter per hour emitter with barbed outlet for attaching to 0.191 tubing. Offering even flow rates at variable pressures, PCAS emitters provide even water from the first to the last dripper. Our LARGER emitter body allows for a wider labyrinth that prevents clogging by letting debris pass through the emitter.
Catalog ↗

4 lph (1 gph) Pressure Compensated Emitter Barbed - Green Insert

Spray stakes & emitters
Sizes
Item PCAS4L-B · Sizes 4 lph
Best for
4 liter per hour emitter with barrel outlet for attaching to 0.191 tubing. Offering even flow rates at variable pressures, PCAS emitters provide even water from the first to the last dripper. Our LARGER emitter body allows for a wider labyrinth that prevents clogging by letting debris pass through the emitter.
Catalog ↗

8 lph (2 gph) Pressure Compensated Emitter PressFit - Red Insert

Spray stakes & emitters
Sizes
Item PCAS8L · Sizes 8 lph
Best for
8 liter per hour emitter with barrel outlet for attaching to 0.191 tubing. Offering even flow rates at variable pressures, PCAS emitters provide even water from the first to the last dripper. Our LARGER emitter body allows for a wider labyrinth that prevents clogging by letting debris pass through the emitter.
Catalog ↗

12 lph (3 gph) Pressure Compensated Emitter PressFit - Black Insert

Spray stakes & emitters
Sizes
Item PCAS12L · Sizes 12 lph
Best for
12 liter per hour emitter with barrel outlet for attaching to 0.191 tubing. Offering even flow rates at variable pressures, PCAS emitters provide even water from the first to the last dripper. Our LARGER emitter body allows for a wider labyrinth that prevents clogging by letting debris pass through the emitter.
Catalog ↗

Barrel to barb Adaptor

Spray stakes & emitters
Sizes
Item MAN1 · Sizes 1 outlet 3mm barb
Best for
Connect barrel outlet emitters to 192 tubing with this adaptor.
Catalog ↗

2 Way Manifold

Spray stakes & emitters
Sizes
Item MAN2 · Sizes 2 outlet 3mm barb
Best for
Two-outlet manifold on 3 mm barbs — splits one dripper feed to two pots. Item MAN2; the four-outlet is MAN4.
Catalog ↗

4 Way Manifold

Spray stakes & emitters
Sizes
Item MAN4 · Sizes 4 outlet 3mm barb
Best for
Four-outlet manifold on 3 mm barbs — one dripper feeds four pots, which is what makes a multi-outlet assembly worth fitting. Item MAN4; the two-outlet is MAN2.
Catalog ↗

Slim Weight - Zinc Aluminum Alloy

Spray stakes & emitters
Sizes
Item PCASW · Sizes 11 Gram
Catalog ↗

18 in. - 0.191 in. Tubing

Spray stakes & emitters
Sizes
Item 191-18, 191-24, 191-36, 191-42, 191-48 · Sizes 18 in., 24 in., 36 in., 42 in., 48 in.
Catalog ↗

4 in. dia Pressure Compensated Dribble Ring

Spray stakes & emitters
Sizes
Item PCR4-24, PCR4-36, PCR4-48, PCR6-12, PCR6-24, PCR6-36, PCR6-48, PCR85-12, PCR85-24, PCR85-36, PCR85-48, PCR10-12 (+7 more) · Sizes 24 in. tube, 36 in. tube, 48 in. tube, 12 in. tube
Catalog ↗

Anchor Stake for Rings

Spray stakes & emitters
Sizes
Item S3ANCHOR · Sizes 6
Best for
The S3ANCHOR holds dribble rings in the pot, keeping them optimally placed for best water distribution.
Catalog ↗

T connector for Dramm PC Rings.

Spray stakes & emitters
Sizes
Item T-PIECE · Sizes -
Best for
The T-Piece has two barbed, secure connections and one smooth connection to allow for the ring to be easily disconnected.
Catalog ↗

1/4 in Microvalve

Spray stakes & emitters
Sizes
Item MTMV-25 · Sizes 1/4 in barbs
Best for
Barbed Microvalve for drip irrigation. Allows individual pressure compensated drippers to be turned off.
Catalog ↗

3mm Barbed Fitting

Spray stakes & emitters
Sizes
Item BARB3 · Sizes 3mm
Catalog ↗

45 deg. Angle Stake 4 in.

Spray stakes & emitters
Sizes
Item ST-45 · Sizes 4 in.
Catalog ↗

45 deg. Angle Labyrinth Stake 4 in.

Spray stakes & emitters
Sizes
Item LST4-45 · Sizes 4 in.
Catalog ↗

Easyclean 45 deg. Angle Labyrinth Stake

Spray stakes & emitters
Sizes
Item ECLST-45, ECLST · Sizes 4 in.
Best for
The Easyclean Labyrinth Stake places the labyrinth inside of the stake body. Simply unthread and clean to remove any debris or algae buildup. Works with any standard multi-outlet drip irrigation system
Catalog ↗

Easyloc Inline Valve

Spray stakes & emitters
Sizes
Item ITVSL16 · Sizes 16mm x 16mm
Best for
Easyloc Inline Valve 16mm x 16mm. Shuts off PE line. Insert as needed. Barb & Compression nut. Needs no additional clamp.
Catalog ↗

Easyloc Inline Valve & Fitting

Spray stakes & emitters
Sizes
Item ITV075SL16 · Sizes 16mm x 3/4in
Best for
Easyloc Inline Valve 16mm x 3/4in. MPT. Connect PVC to PE. Barb & Compression nut. Needs no additional clamp.
Catalog ↗

Easyloc Fitting

Spray stakes & emitters
Sizes
Item ITF075SL16 · Sizes 16mm x 3/4in
Best for
Easyloc Fitting 16mm x 3/4in. MPT. Connect PVC to PE. Barb & Compression nut. Needs no additional clamp.
Catalog ↗

Easyloc Tee

Spray stakes & emitters
Sizes
Item ITTSL16 · Sizes 16mm
Best for
Easyloc Tee 16mm. Barb & Compression nut. Needs no additional clamp.
Catalog ↗

Easyloc Elbow

Spray stakes & emitters
Sizes
Item ITESL16 · Sizes 16mm
Best for
Easyloc Elbow 16mm. Barb & Compression nut. Needs no additional clamp.
Catalog ↗

Easyloc Coupling

Spray stakes & emitters
Sizes
Item ITCSL16 · Sizes 16mm
Best for
Easyloc Coupling 16mm. Barb & Compression nut. Needs no additional clamp.
Catalog ↗

Figure 8 Clamp

Spray stakes & emitters
Sizes
Item 600AP8 · Sizes 16mm
Best for
Figure 8 clamp to close 16mm PE ends.
Catalog ↗

Dribble Ring for 6 & 7 Containers

Spray stakes & emitters
Sizes
Item DR4-24, DR4-36, DR4-48, DR6-12, DR6-24, DR6-36, DR6-48, DR85-12, DR85-24, DR85-36, DR85-48, DR10-12 (+7 more) · Sizes 24 in, 36 in, 48 in, 12 in, 12, 24, 36, 48 · Colors -
Catalog ↗

Strand Dripper 12lph - 18 in Tube

Spray stakes & emitters
Sizes
Item ST18-A112, ST24-A112, ST30-A116, ST42-A116, ST30-A124, ST42-A124, STP12-A208, STP18-A208, STP18-A212, STP24-A212, STP30-A216, STP42-A216 (+2 more) · Sizes 18 in, 36 in, 42 in, 30 in, 12 in, 24 in · Colors -
Best for
Strand Dripper 12 lph flow rate with 18 inch perforated tube.
Catalog ↗

Chemical application 74

Mini AutoFog

Chemical application
Sizes
Item MLVH-10A · Sizes 120 volt
Best for
Treats up to 5,000 sq ft alone or up to 7,000 sq ft with HAF fans. Perfect for individual greenhouses, quonset huts and smaller areas. More than one can be used together for larger areas and separated for smaller areas.
Catalog ↗

Autofog

Chemical application
Sizes
Item SLVH-20A · Sizes 120 volt
Best for
Treats 12,000 square feet . Treats 26,000 square feet with additional fans . Fogger head separates from control & compressor carriage for portable use .
Catalog ↗

Large AutoFog

Chemical application
Sizes
Item LVH-20A · Sizes 220 volt
Best for
Treats 30,000 square feet. Treats 70,000 square feet with additional fans . Fogger head separates from control & compressor carriage for portable use. 240 Volts 60HZ, single phase
Catalog ↗

Coldfogger 20 gallon

Chemical application
Sizes
Item CFAR-20/150 · Sizes 20 gallon
Best for
The CFAR-20/150 Coldfogger is a low-volume chemical applicator that can easily apply all formulations of pesticides, growth regulators, fungicides, vaccines, cleaning products and disinfectants using a highly concentrated spray solution. The low-volume method of applying chemical solutions diminishes costly run-off and greatly reduces application times. Very small droplets are generated to provide deep and even penetration of chemicals. The large tank holds enough spray solution to provide up to 70,000 sq. ft. of coverage in as little as 70 minutes. The powerful high pressure fog projects a plume of 30-60 micron diameter spray droplets 20 - 25 feet from the hand held spray gun. The quality of spray is a tremendous improvement over conventional hydraulic sprayers that produce droplets that vary in size from 100 - 400 microns. Includes 150 feet of High Pressure Hose and can come with the standard solid rubber tires or the BigFoot pneumatic wheel kit.
Catalog ↗

Coldfogger 50 gallon

Chemical application
Sizes
Item CFAR-50 · Sizes 50 gallon
Best for
The 50 gallon Coldfogger can treat up to 200,000 with one tankload of solution. The CFAR-50 is available with 150' or 300' of high pressure hose and can come with either solid rubber wheels or the BigFoot pneumatic wheel option.
Catalog ↗

150 Foot High Pressure Hose

Chemical application
Sizes
Item 1032587001 · Sizes 150'
Best for
150 ft high-pressure hose for the Coldfogger, letting the fogger head reach well away from the cart. Item 1032587001 — the 300 ft version is 1045565001.
Catalog ↗

300 Foot High Pressure Hose

Chemical application
Sizes
Item 1045565001 · Sizes 300'
Best for
300 ft high-pressure hose for the Coldfogger — double the reach of the 150 ft, for treating a long house from one position. Item 1045565001.
Catalog ↗

K-10 Portable PulsFOG

Chemical application
Sizes
Item K-10 · Sizes 25 HP/10 Liter
Best for
For greenhouses. Fogs 10 liters in 45 minutes. Propels fog up to 65 feet.
Catalog ↗

K-10/O Portable Livestock PulsFOG

Chemical application
Sizes
Item K-10/O · Sizes 25 HP/10 Liter
Best for
For livestock or outdoor. For use with oil-based formulations. Fogs 10 liters in 45 minutes. Propels fog up to 65 feet.
Catalog ↗

K-22 Standard PulsFOG

Chemical application
Sizes
Item K-22 · Sizes 50 HP/10 Liter
Best for
For greenhouses. Fogs 10 liters in 30 minutes. Propels fog up to 120 feet.
Catalog ↗

K-22/O Portable Livestock PulsFOG

Chemical application
Sizes
Item K-22/O · Sizes 50 HP/10 Liter
Best for
For livestock or outdoor use. For use with oil-based formulations. Fogs 10 liters in 30 minutes. Propels fog up to 120 feet.
Catalog ↗

K-22 BIO Portable PulsFOG

Chemical application
Sizes
Item K-22 BIO · Sizes 50 HP/2-5 Liter
Best for
For greenhouses or livestock. Safe for heat sensitive products. Fogs 5 liters in 15 minutes. Propels fog up to 120 feet.
Catalog ↗

K-30 Standard PulsFOG

Chemical application
Sizes
Item K-30 · Sizes 100 HP/10 Liter
Best for
For greenhouses. Fogs 10 liters in 15 minutes. Propels fog up to 220 feet.
Catalog ↗

K-30/O Portable Livestock PulsFOG

Chemical application
Sizes
Item K-30/O · Sizes 100 HP/10 liter
Best for
For livestock or outdoor use. For use with oil-based formulations. Fogs 10 liters in 15 minutes. Propels fog up to 220 feet.
Catalog ↗

K-30 Large BIO PulsFOG

Chemical application
Sizes
Item K-30/20 BIO · Sizes 100 HP/2- 55 liter tanks
Best for
For greenhouses or livestock. Safe for heat sensitive products. Fogs 55 liters in 80 minutes. Propels fog up to 220 feet.
Catalog ↗

K-30 Large BIO PulsFOG Dual Start

Chemical application
Sizes
Item K-30/20 BIO-DS · Sizes 100 HP/2- 55 liter tanks
Best for
The Dual Start K-30/20 BIO offers both the Manual Priming Ball and a Push-button, compressor-driven starting mechanism for easier starting
Catalog ↗

K-30 Large Livestock PulsFOG

Chemical application
Sizes
Item K-30/20/O · Sizes 100 HP/55 liter
Best for
For livestock or outdoor use. For use with oil-based formulations. Fogs 55 liters in 80 minutes. Propels fog up to 220 feet.
Catalog ↗

K-40 Large BIO PulsFOG

Chemical application
Sizes
Item K-40 PulsFOG · Sizes 125 HP/2- 55 liter tanks
Best for
For greenhouses or livestock. Safe for heat sensitive products. Fogs 50 liters in 50 minutes. Propels fog up to 300 feet. 100 Liter tanks available.
Catalog ↗

K-50 Large Bio PulsFOG®

Chemical application
Sizes
Item K-50 PulsFOG · Sizes 175 HP/2- 55 Liter tanks
Best for
For greenhouses or livestock. Safe for heat sensitive products. Fogs 50 liters in 30 minutes. Propels fog up to 350 feet. Larger tanks available.
Catalog ↗

Carrier Solution

Chemical application
Sizes
Item Carrier · Sizes Various
Best for
Use of the PulsFOG requires a carrier solution to help reduce surface tension and create evenly sized droplets. There are three solutions available. For most horticultural applications, NutriFOG is the preferred carrier. VK-I and VK-II are also available. NutriFog and VK-II are for all chemical formulations and mixed with water. VK-I is for EC chemicals only and is NOT to be mixed with water. For SDS Sheets, click on the MANUAL Link Below.
Catalog ↗

NutriFog - For all chemicals

Chemical application
Sizes
Item NF-20, VK2-5G, VK2-1G, PFC-1G, VK2-55G · Sizes 20 liters, 5 gallons, 1 gallon, 55 gallons
Best for
NutriFOG is a 10-3-3 foliar fertilizer. It can be used with all chemical formulations. It is safe on all ornamentals. 0.25 liters mixed with 1.75 liters of water will treat 10,000 square feet. Do not use more than 5 times in one month on the same crop. Available in 20 liter (5 gallon) containers. NutriFOG Instructions NutriFOG Brochure
Catalog ↗

Turbo ULV 110v

Chemical application
Sizes
Item TULV110 · Sizes 5 liter
Best for
The Turbo ULV 110v Targeted Cold Fogger. The TULV110 offers an adjustable output from 5-11 liters/hour and an adjustable particle size range of 10-100 . Depending on the output and particle size, the TULV110 can propel the fog up to 75 feet.
Catalog ↗

Turbair Electrafan

Chemical application
Sizes
Item TEF-12 · Sizes 12 volt
Best for
· Targeted Low Volume · Perfect for spot treatment · Lightweight, portable machine · 12 v DC · 50-60µ VMD · Covers distances from 10-20 feet The Turbair Electrafan (TEF) is an air assisted spinning disc sprayer for low and ultra-low volume application of insecticides and fungicides in situations with no natural air movement, e.g. indoors. The Electrafan 110 is powered by an A/C electric motor of 110 volts (60hz) and uses a suitable extension cable which allows treatments up to 200 ft. from a power source. The Electrafan 110 can efficiently apply water-based mixtures at both low volumes (normally 8 to 16 liters/acre) and ultra-low volume (ULV) formulations. The Electrafan can be used in glasshouses and polytunnels for the treatment of crops, for pest control in buildings, insect control in animal houses and for applying vaccines to poultry.
Catalog ↗

ULVA+

Chemical application
Sizes
Item ULVA+ · Sizes -
Best for
· Lightweight · Easy to Use · Variable Flow Rate · Charge lasts 40 hours · Powered by 4° D Cell Batteries The ULVA+ is a rotary disk atomizer that applies chemicals evenly both indoors and outdoors. It is designed for use in areas where there is natural air movement. The ULVA+ is perfect for outdoor row crops as well as cut flowers. The ULVA+ produces 50-60° droplets that drift on air currents as they drop, providing even coverage on all plant surfaces. The one liter bottle can treat up to 6,000 square feet with one fill. The ULVA+ uses 4 D cell batteries. Complete with batteries & recharger.
Catalog ↗

Microfit Herbi Standard Lance

Chemical application
Sizes
Item MH-1 · Sizes -
Best for
6V DC (4-D cell/R20 batteries) Over 40 hours spraying 4 Ft. band width 200-300µ (microns) Droplet size Lightweight, portable machine · Powerpack is interchangeable with Microfit lances The Microfit Herbi, part of the modular Microfit system, is a spinning disc sprayer for the Controlled Droplet Application (CDA) of herbicides and other chemicals. It can apply CDA formulations or traditional water-based products at total spray volumes of only 5-20 liters/acre. The consistently large spray droplets, of around 250µ (microns), minimize the risk of spray drift and fall in a precise 4 ft. wide circular spray pattern. Herbaflex and Herbi-Twin attachments are available for narrower or wider band widths. The Herbi is used worldwide for band spraying and can treat several acres in one hour. Uses include general clean-up, border, pathway, or strip spraying, and spraying of larger areas by making consecutive spray passes. The reduction in mixing and filling operations offers operator safety advantages.
Catalog ↗

Microfit Herbi Flex Lance

Chemical application
Sizes
Item MHF-2 · Sizes -
Best for
The Herbiflex lance sprays a 4 - 20 inch band spray that is directable. An optional spray shield is available to protect desired plantings.
Catalog ↗

Microfit Herbi Twin Lance

Chemical application
Sizes
Item MHT-3 · Sizes -
Best for
5.5 - 7.5 Ft. band width Lightweight, portable machine Powerpack is interchangeable with Microfit lances The Microfit Herbi-Twin, part of the modular Microfit system, is a twin-headed, spinning disc sprayer for the Controlled Droplet Application (CDA) of herbicides and other chemicals. The Herbi-Twin greatly reduces time by doubling the area covered per pass. The twin disks create an adjustable band width of 5.5 - 7.5 ft. for maximum dispersal of chemical. The Herbi-Twin is used for wide band spraying. Uses include pathway or strip spraying (e.g. in orchards and plantations,) and spraying of larger areas by making consecutive spray passes. The reduction in mixing and filling operations (with no mixing required for CDA formulation) offers operator safety advantages. Optional Herbaflex and Herbi lances available. The Microfit Herbi-twin is a low volume sprayer that has a high work rate and is very economical.
Catalog ↗

MSO Pro Sprayer Package

Chemical application
Sizes
Item MSO Pro · Sizes 100 ft hose
Best for
Upgrades the MS20-100 to include a separate agitation system and pressure gauge for better spray accuracy. MSO Pro is available with the standard or BigFoot wheel package.
Catalog ↗

Herbi Power Pak (with bottle)

Chemical application
Sizes
Item PPM-#4 · Sizes -
Best for
Herbi Power Pak with bottle.
Catalog ↗

Herbi Microfit Standard Lance

Chemical application
Sizes
Item LH-1A · Sizes -
Best for
Standard Herbi Microfit Lance.
Catalog ↗

Herbi Microfit Flex lance

Chemical application
Sizes
Item LH-2A · Sizes -
Best for
Herbi Microfit Flex lance.
Catalog ↗

Herbi Microfit Twin Lance

Chemical application
Sizes
Item LHT-3 · Sizes -
Best for
Herbi Microfit Twin Lance.
Catalog ↗

5 Liter Backpack

Chemical application
Sizes
Item 5-LBP · Sizes 5 liter
Best for
5 Liter Backpack for Microfit Herbiflex sprayers.
Catalog ↗

MSO - Heavy Duty Sprayer

Chemical application
Sizes
Item MSO · Sizes -
Best for
Fully adjustable pressure- up to 500PSI Adjustable spray pattern & output rates 33' Discharge hose Optional cart Solid bronze pump construction with oiless bearings Durable metal housing 120V AC The Dramm Heavy-Duty sprayer is powerful and compact- designed for every type of chemical application. Model MSO is a hydraulic sprayer with fully adjustable pressures, making it a highly flexible tool for the application of pesticides, fungicides, wetting agents, cleaning solutions and disinfectants. By simply twisting the spray gun knob you can adjust the pressure from a stream that throws up to 20 feet to an eight foot diameter mist.
Catalog ↗

Gasoline Power Sprayer

Chemical application
Sizes
Item MSO-GAS#2 · Sizes -
Best for
2-Stroke Engine. Dual Piston Pump with Uniflow Design Minimizes Pump Wear. Bronze & Stainless Steel Pump Construction Adjustable Trigger Spray Gun Oe,Three Pressure Regulator Settings,66 ft™ Discharge Hose Optional 100ft™ Hose Available Oe,12 Gallon Aluminum Cart The Dramm MS-Gas sprayer is powerful and compact- designed for every type of chemical application. Powered by a 2-stroke engine for reliability. Model MSO GAS is a hydraulic sprayer with fully adjustable pressures, up to 350psi making it a highly flexible tool for the application of pesticides, fungicides, wetting agents, cleaning solutions and disinfectants. By simply twisting the spray gun knob you can adjust the pressure from a stream that throws up to 20 feet to an eight foot diameter mist.
Catalog ↗

MSO Sprayer 100' Package

Chemical application
Sizes
Item MS20-100 · Sizes 100 ft hose
Best for
Includes the MSO Sprayer on our MS-20E Cart with 100' of hose and a reel.
Catalog ↗

MSO Sprayer 33' Package

Chemical application
Sizes
Item MS20-33, MS20-100NR, MS-20E, MS-R · Sizes 33 ft hose, 100 ft hose, 20 gallons, -
Best for
Includes the MSO Sprayer with 33' hose on our MS-20E Cart. NOTE: THIS PACKAGE DOES NOT INCLUDE THE REEL.
Catalog ↗

BlueFlex Spray Hose 33'

Chemical application
Sizes
Item BLF25-DH33 · Sizes 1/4 x 33'
Best for
BlueFlex 1/4 DIA. Durable, Flexible Spray Hose - 33'. For MSO and MS-Gas Sprayers
Catalog ↗

BlueFlex Spray Hose 100'

Chemical application
Sizes
Item BLF25-DH100 · Sizes 1/4 x 100'
Best for
BlueFlex 1/4 DIA. Durable, Flexible Spray Hose - 100' For MSO and MS-Gas Sprayers
Catalog ↗

Trigger-Style Spray Gun

Chemical application
Sizes
Item MS-TG · Sizes 0.5 gpm
Best for
Adjustable Output with On/Off Trigger for MSO, CS-5AGS or MS-GAS
Catalog ↗

Chemdose 2

Chemical application
Sizes
Item CD-2 · Sizes No tank
Best for
The CD-2 is a portable, hose-end unit that connects to either an injector or hydraulic sprayer below 75 psi. This eliminates problems with hose length and power.
Catalog ↗

ChemDose

Chemical application
Sizes
Item CD-120 · Sizes 20 gallons
Best for
The CD-120 Chemdose is a cart mounted precision dosing system. With a 20 gallon tank, an 18 width and a rechargeable battery, the CD-120 is very portable. Includes 3 different wand lengths.
Catalog ↗

ChemDose without cart

Chemical application
Sizes
Item CD-100 · Sizes No tank
Best for
Includes 3 Different Wands: On Bench, Floor, & Hanging Basket; Charger and 25' Hose
Catalog ↗

Hydrosensitive Paper

Chemical application
Sizes
Item HYDPAP · Sizes 10 pack
Best for
Dramm's Hydrosensitive Paper turns blue when it comes into contact with water or oil. Very useful for showing the deposit of spray particles and for training new applicators.
Catalog ↗

Hydra Sprayer - 50 gallon

Chemical application
Sizes
Item HYDRA · Sizes 120 volt
Best for
Years of experience have culminated in Dramm's Hydra Sprayer line. The Hydra offers larger hose lengths, greater flow rates and larger tanks. The Hydra line is easy-to-use with features such as a convex reel to prevent birdnesting and a specialized agitation system to keep even stubborn powders in suspension.
Catalog ↗

Hydra Sprayer - 50 gallon - Corrosion Resistant Fittings

Chemical application
Sizes
Item HYDRA-CRF · Sizes 120 volt
Best for
Upgrade to corrosion resistant fittings for the Hydra 50 gallon sprayer.
Catalog ↗

Hydra SprayTrax - 50 Gallon

Chemical application
Sizes
Item HYDRAG-ST50 · Sizes 50 gal
Best for
The 50 gallon Hydra SprayTrax is available in either gasoline or electric. The unit comes with a variety of hose lengths (150', 200' 250') on a variable tension drag, locking reel. The SprayTrax cart is designed for maximum manueverability with tracking axles that both turn. The SprayTrax can turn 360° within 7'. The HydraSprayTrax is available with either an electric motor or a 5.5 HP Honda gasoline motor.
Catalog ↗

Hydra SprayTrax - 100 Gallon

Chemical application
Sizes
Item HYDRAG-ST100 · Sizes 100 gal
Best for
The 100 gallon Hydra SprayTrax is available as either gasoline or electric. Electric start option is available on the Honda 5.5HP engine. The larger platform allows for additional reel options cantilevered off the rear of the unit.
Catalog ↗

Hydra 200 G - 200 Gallon Sprayer

Chemical application
Sizes
Item HYDRA200G · Sizes 200 gal
Best for
The Hydra200G is available as either gasoline or electric. The large platform allows for up to two reels (gas only) and a second, smaller tank for smaller jobs. Click for more information.
Catalog ↗

Spraytrax Electricwind

Chemical application
Sizes
Item ELECW · Sizes Up to 300'
Best for
The Dramm Electricwind for the Hydra Spraytrax 100 offers push button winding of the spray hose at a variable rate of speed.
Catalog ↗

Spraytrax RemoteWind

Chemical application
Best for
The Dramm RemoteWind Reel for the Hydra SprayTrax 100 offers motorized, remote winding of the reel from the end of the hose at a variable rate of speed.
Catalog ↗

Hydra Trigger Gun

Chemical application
Sizes
Item MS40-TG · Sizes -
Best for
Adjustable Output for Hydra Sprayers. Adjusts from a straight stream to a fine cone with an easy to use lever. Comes standard with the Hydra line of sprayer. Various nozzle tips are available.
Catalog ↗

Adjustable Stainless Steel Spray Gun

Chemical application
Sizes
Item MD-9 · Sizes -
Catalog ↗

Female Stainless Steel Quick Connect

Chemical application
Sizes
Item 220301 · Sizes -
Best for
Female Stainless Steel Water Stop Quick Connect for pressures up to 3,000 psi
Catalog ↗

Male Stainless Steel Quick Connect

Chemical application
Sizes
Item 220300 · Sizes -
Best for
Male Stainless Steel Water Stop Quick Connect for pressures up to 3,000 psi
Catalog ↗

BlueFlex Spray Hose 150'

Chemical application
Sizes
Item BLF25-DH150 · Sizes 1/4 x 150'
Best for
BlueFlex 1/4 DIA. Durable, Flexible Spray Hose - 150' For HYDRA, MSO and MS-Gas Sprayers
Catalog ↗

BlueFlex Spray Hose 200'

Chemical application
Sizes
Item BLF375-DH200 · Sizes 3/8 x 200'
Best for
BlueFlex 3/8 DIA. Durable, Flexible Spray Hose - 200' For Hydra Sprayers
Catalog ↗

BlueFlex Spray Hose 250'

Chemical application
Sizes
Item BLF375-DH250 · Sizes 3/8 x 250'
Best for
BlueFlex 3/8 DIA. Durable, Flexible Spray Hose - 250' For Hydra Sprayers
Catalog ↗

Battery Operated Backpack Sprayer with Li Swappable Battery

Chemical application
Sizes
Item BP-4Li · Sizes 4 gallons
Best for
The BP-4Li offers completely variable pressure from 10-150psi and a swappable Makita 3 ah Lithium Ion battery. Like its predecesor, the BP-4Li provides a powerful spray with fine droplets. The unit comes with a twin fan nozzle and a conical bullet nozzle. Other nozzle options are available. Additional batteries are available for purchase. Operating time on one battery is 45 min.
Catalog ↗

Foam 8L Compression Foamer

Chemical application
Sizes
Item FOAM8L · Sizes 5 L capacity
Best for
The FOAM8L is a foamer that uses compressed air to make a rich foam. Like a compression sprayer, you hand pump the FOAM8L but, leave a reservoir of air in the tank. This air mixes with the solution to create the foam. Requires the use of foamable products.
Catalog ↗

FM20 Cart Mounted Foamer

Chemical application
Sizes
Item FM20-25 · Sizes 20 gallon
Best for
The FM20 Foamer connects to your compressor to create a rich, aerated foam that will adhere to vertical surfaces and persist, improving contact time.
Catalog ↗

FM20 Cart Mounted Foamer with BigFoot Wheel Kit

Chemical application
Sizes
Item FM20-25-BF · Sizes 20 gallon
Best for
FM20-25 Foamer with pneumatic 15 turf tires and outrigger pneumatic casters.
Catalog ↗

FM50 Cart Mounted Foamer

Chemical application
Sizes
Item FM50-25 · Sizes 50 gallon
Best for
The FM50 uses the same foaming system as the smaller units but with a 50 gallon tank on our HydraCart Frame. The FM50 comes with a 25' hose standard, but can use up to 75' with 5 CFM @ 60 psi.
Catalog ↗

FMST50 SprayTrax Foamer 50 gallon

Chemical application
Sizes
Item FMST50-25 · Sizes 50 gallon
Best for
Foamer on 50 gallon SprayTrax Cart. The FMST50 comes with a 25' hose standard, but can use up to 75' with 5 CFM @ 60 psi. Optional hose reels are available for units with longer lengths of hose.
Catalog ↗

FMST100 SprayTrax Foamer 100 gallon

Chemical application
Sizes
Item FMST100-25 · Sizes 100 gallon
Best for
Foamer on 100 gallon SprayTrax Cart. The FMST100 comes with a 25' hose standard, but can use up to 75' with 5 CFM @ 60 psi.
Catalog ↗

50 ft x 5/8in Hose

Chemical application
Sizes
Item FM17003 · Sizes 50 ft x 5/8in
Best for
50 ft x 5/8in Hose for Larger Dramm Foamers
Catalog ↗

75 ft x 3/4in Hose

Chemical application
Sizes
Item FM17213 · Sizes 75 ft x 3/4in
Best for
75 ft x 3/4in Hose for Larger Dramm Foamers - Requires more than 5 CFM to operate.
Catalog ↗

TracFOG PTO Driven Fast Fogger 400 AutoValve

Chemical application
Sizes
Item TF400A · Sizes 400 liter (100 gal)
Best for
The TracFOG PTO driven fast fogger is a tractor mounted fogger that creates ultra-fine particles and propels them hundreds of feet. The TracFOG400 has a 400 liter (100 gallon) tank and two directable nozzles. The new Autovalve version includes solenoids to control each nozzle as well as a pneumatic directional reversal.
Catalog ↗

TracFOG PTO Driven Fast Fogger 400 Greenhouse Vegetable

Chemical application
Sizes
Item TF400GV · Sizes 400 liter (100 gal)
Best for
The TracFOG 400GV is like the standard unit but with much taller nozzle masts allowing the nozzles to be aimed above greenhouse vegetable crops. The GV unit does not have the automatic nozzle system.
Catalog ↗

TracFOG PTO Driven Fast Fogger 100 Autovalve

Chemical application
Sizes
Item TF100A · Sizes 100 liter (25 gal)
Best for
The TracFOG 100 has all of the features of the larger 400 but with a smaller tank. The 100 liter (25 gallon) tank can treat up to 500,000 square feet when full.
Catalog ↗

TracFOG PTO Driven Fast Fogger 100 Greenhouse Vegetable

Chemical application
Sizes
Item TF100GV · Sizes 100 liter (25 gal)
Best for
The TracFOG 100 has all of the features of the larger 400 but with a smaller tank. The 100 liter (25 gallon) tank can treat up to 500,000 square feet when full. The TF100GV has taller booms to be able to reach above tall vine crops.
Catalog ↗

Watercart 20 gallon

Chemical application
Sizes
Item WC20 · Sizes 20 gallon
Best for
20 gallon cart with battery operated pump for portable watering. Pumps 300 gallons before a recharge is needed.
Catalog ↗

Watercart 50 gallon

Chemical application
Sizes
Item WC50 · Sizes 50 gallon
Best for
50 gallon cart with battery operated pump for portable watering. Pumps 300 gallons before a recharge is needed.
Catalog ↗

Aeration/Agitation Bucket

Chemical application
Sizes
Item AAB120V · Sizes 5 gallon
Best for
The Aeration/Agitation Bucket keeps various solutions in suspension with or without aeration. Perfect for fertilizers, insecticides, fungicides, PGRs and nematodes
Catalog ↗

AC Controller 13

MistTime Misting Controller

AC Controller
Sizes
Item MT-10 · Sizes 10 Output · Colors -
Best for
The Dramm MistTime Controller is perfect for time or temperature based control of misting valves. With the ability to program each valve independently, the MistTime offers unmatched flexibility. Each valve is operated on a cycle. The timing is variable with the duration operating between 1 second and 60 minutes and the interval time operating between 1 minute and 12 hours. Each valve can be run continuously, between specific times, or even started when the temperature rises above a set point. With the ability to program each valve independently, the controller can operate as a time based mist controller, a pulse-irrigation controller and a mist cooling controller at the same time. In addition, the MistTime offers the option to convert the last valve output to a pump pre-start output. When configured in this manner, the operator is given an option to pre-start a pump prior to any valve operation. The pre-start time is variable. This ensures that the system is properly pressurized when the mist system is in operation. The MistTime is easy to program using a keypad to navigate the menu and enter amounts. For flexibility, the MistTime can be programmed in English, Spanish, French or Dutch. The MistTime operates on 120vAC or 220vAC and includes a 24vAC output. The unit is enclosed in a NEMA 4 rated PVC housing and is easy to wire and install.
Catalog ↗

ProLine Irrigation Controller - 4 Station (expandable)

AC Controller
Sizes
Item PL1600-04 · Sizes 4 output · Colors -
Best for
The ProLine Irrigation Controller offers advanced control features such as multiple program operation, master valve, multiple start times per day, manual operation, and an option to add cellular connectivity to monitor and modify irrigation operation from your phone.
Catalog ↗

ProLine Irrigation Controller - 8 Station (expandable)

AC Controller
Sizes
Item PL1600-08, PL1600-12, PL1600-12B, PL1600-16, PL1600-20, PL1600-24, PL-1600-M4, PL-1600-M12, PL-420LS · Sizes 8 output, 12 output, 12 output (base), 16 output, 20 output, 24 output, 4 output module, 12 output module, - · Colors -
Catalog ↗

RainPro 4 Output Expansion Module

AC Controller
Sizes
Item RPIC-M4 · Sizes 4 Outputs · Colors -
Best for
The RainPro has been discontinued. However, we still have 4 output modules to upgrade existing units. This module fits into open slots in the RainPro 03, 07 and 11 version to add 4 outputs to increase the capacity of the unit.
Catalog ↗

Villa Wirelessly Programmed Irrigation Controller

AC Controller
Sizes
Item WFVILLA-06, WFVILLA-12 · Sizes 6 Outputs, 12 Outputs · Colors -
Best for
The Villa Irrigation Controller brings smart features to your watering. The unit can be programmed via the onboard display, a Bluetooth enabled phone (iOS or Android) or via a web browser.
Catalog ↗

350mm HAF Fan

AC Controller
Sizes
Item 350/4 · Sizes 350mm
Best for
The Dramm AME Horizontal Air Flow (HAF) Fans offer efficiency, flexibility, and simplicity. Utilizing an aerodynamic design and a high-efficiency motor, the AME fan is equipped to maximize the air flow potential of any situation. When combined with speed controllers, the AME Fans offer unmatched flexibility in air flow as plants grow and mature. Because of their shrouded, aerodynamic design and high-efficiency motor, Air Movement Efficiency (AME) fans cover greater distances with better, more even air speeds. The AME Fan design provides leverage for air movement. The result is not only increased forward propulsion but a pull from behind the fan as well. This helps to even air speeds by creating momentum throughout the house. The result is fewer fans needed and an increase in efficacy and reduction in electrical costs. The Dramm AME Horizontal Air Flow System performs best when sized to fit a particular situation. Dramm technical personnel take into account many different variables in each greenhouse before designing a customized layout. To have a layout prepared for your greenhouse please contact your Dramm Technical Representative. The AME fans and Controllers can be connected to an external climate control computer for automated speed regulation.
Catalog ↗

400mm HAF Fan

AC Controller
Sizes
Item 400/4 · Sizes 400mm
Catalog ↗

5 AMP AME Fan Controller

AC Controller
Sizes
Item PS-05 · Sizes 5 AMP
Best for
The Dramm PS-05 Variable Power Station offers control without computer inputs. This lower cost version of our controller range provides speed control by use of the knob only.
Catalog ↗

6 AMP AME Fan Controller

AC Controller
Sizes
Item PS-06 · Sizes 6 AMP
Best for
Speed controller for AME HAF fans, rated 6 amp — the smallest of the three, for a short run of fans. Item PS-06. Step up to PS-10 or PS-20 as the fan count grows.
Catalog ↗

10 AMP AME Fan Controller

AC Controller
Sizes
Item PS-10 · Sizes 10 AMP
Best for
Speed controller for AME HAF fans, rated 10 amp — the mid capacity. Item PS-10.
Catalog ↗

20 AMP AME Fan Controller

AC Controller
Sizes
Item PS-20 · Sizes 20 AMP
Best for
Speed controller for AME HAF fans, rated 20 amp — the largest, for a full house of fans on one circuit. Item PS-20.
Catalog ↗

Single Stage Thermostat

AC Controller
Sizes
Item T41 · Sizes 12-240v
Best for
The Dramm Microfan mechanical thermostats are designed with rough environments in mind. These high quality thermostats are perfect for any situation where harsh conditions may damage less durable equipment. Protected in sealed PVC housings, these thermostats offer stainless steel coiled sensors and accuracy to 1° C. The SPDT (Single Pole Double Throw) switch contact (one set of contacts open on temperature rise as the other set closes) is a no load contact and offers superior accuracy. Designed to be placed in the area to be controlled, the Dramm Microfan Thermostats are perfect for heating, cooling, and ventilation control in greenhouses, factory buildings, warehouses, farms or anywhere requiring accuracy in control. Two different thermostats are available: the T41-SV Single-Stage and the T42-SV Double-Stage Thermostat. Both are CSA approved and available in Canada.
Catalog ↗

Two Stage Thermostat

AC Controller
Sizes
Item T42 · Sizes 12-240v
Catalog ↗

Specialized tool 12

Pick-Up Stix

Specialized tool
Sizes
Item PSTX · Sizes 30 in · Colors Silver
Best for
Jumbo tweezer tool for liter pick up. Aluminum and plated steel with comfort grip.
Catalog ↗

Hanging Basket Remover

Specialized tool
Sizes
Item HBR · Sizes 36 Handle · Colors Silver
Best for
Comes with 10 in diameter ring and 36 rod to conveniently remove hanging baskets from hard-to-reach areas above! Rings also available for 8 or 12 inch pots. Rod also available in 60 in or 84 in lengths.
Catalog ↗

ColorWear Half Apron

Specialized tool
Sizes
Item 19020 · Sizes Half size · Colors 3 colors
Best for
The ColorWear Apron is great for gardening, landcaping, interiorscaping and garden center workers. A unique center mesh zippered pocket holds deadheads and yard debris, unzipping to dump. Other pockets store tools. Keeps you clean while you work.
Catalog ↗

ColorPoint Compact Shear

Specialized tool
Sizes
Item 18010 · Sizes Compact · Colors 6 colors
Best for
Perfect for quick cutting and deadheading. Small compact design for comfortable use. Six colors so everyone gets their color choice.
Catalog ↗

ColorPoint Compact Pruner

Specialized tool
Sizes
Item 18020 · Sizes Compact · Colors 6 colors
Best for
Perfect for small woody cutting. Small compact design for comfortable use. Six colors allows for personalization while pruning.
Catalog ↗

ColorPoint Lopper

Specialized tool
Sizes
Item 18050 · Sizes 24 in. · Colors 6 colors
Best for
SK5 Steel, Lightweight Aluminum Handle. Comfortable rubber grips. Six colors for stylish pruning. Incredibly sharp. Replaceable blades.
Catalog ↗

ColorPoint Hydroponic Shear Stainless Steel

Specialized tool
Sizes
Item 18037 · Sizes 3 in. Blade · Colors Yellow
Best for
Little Buddy Hydroponic Shear with durable stainless steel blades.
Catalog ↗

ColorPoint Hydroponic Shear Titanium

Specialized tool
Sizes
Item 18033 · Sizes 3 in. Titanium Coated Blade · Colors Yellow
Best for
Little Buddy Hydroponic Shear with titanium coated stainless steel blades to resist sap buildup.
Catalog ↗

Multi-Tool for Irrigation

Specialized tool
Sizes
Item ML-TOOL · Sizes Multi
Best for
Multi-tool for irrigation installation. Cuts PE, punches holes with 3,4,5 mm blades. Inserts barbed components into PE.
Catalog ↗

3mm Punch for 16mm or 1/2 Tubing

Specialized tool
Sizes
Item PUNCH1650 · Sizes 3mm
Best for
Easy-to-use 3mm Punch for 16mm or 1/2 Tubing
Catalog ↗

Universal Hand Pick Tool

Specialized tool
Sizes
Item HPT · Sizes - · Colors -
Best for
The Dramm Hand Pick Tool is used for the insertion of Dramm Brass Eyelets into poly tubing for the use of Dramm Dribble Tubes and Rings. Place an eyelet onto the tip of the Handpik tool and push firmly into the black poly tubing. The Hand Pick Tool will pierce the poly tubing and insert the brass eyelet in one leak-free operation!
Catalog ↗

Gauge Test Kit

Specialized tool
Sizes
Item GN3020K · Sizes - · Colors -
Best for
Kit to test pressures in irrigation system. Includes portable gauge, 1 punch tool, 5 needles, 5 barb adaptors, 5 threaded adaptors
Catalog ↗

Bench & tubing support 30

PolyRail 16mm Aluminum Extrusion

Bench & tubing support
Sizes
Item ALU16 · Sizes 12' section
Best for
PolyRail aluminum extrusion tightly sleeves PE tubing keeping it rigid, without sags. PolyRail keeps nozzles straight and even, ensuring the best coverage for your irrigation system. Installs easily without glue.
Catalog ↗

PolyRail 25mm Aluminum Extrusion

Bench & tubing support
Sizes
Item ALU25 · Sizes 12' section
Best for
25mm (3/4) diameter. For higher flow and more support. 25mm PolyRail may be used to hang baskets
Catalog ↗

PolyRail Connecting Band

Bench & tubing support
Sizes
Item ALU501CB · Sizes 4 inch
Best for
Connecting band with set screws. 4 length. Connects two rail pieces together.
Catalog ↗

PolyRail 90 deg Hanger 16mm

Bench & tubing support
Sizes
Item ALU500PH · Sizes 16mm
Best for
Right-angle hanger that carries 16 mm PE tubing off the PolyRail extrusion. Item ALU500PH — the 25 mm hanger is ALU500-90.
Catalog ↗

PolyRail 90 deg Hanger 25mm

Bench & tubing support
Sizes
Item ALU500-90 · Sizes 25mm
Best for
Right-angle hanger for 25 mm PE tubing on the PolyRail extrusion. Item ALU500-90 — the 16 mm hanger is ALU500PH.
Catalog ↗

PolyRail Top Hanger

Bench & tubing support
Sizes
Item ALU502H · Sizes Top
Best for
Hanger rides on Rail to position PE outlet towards the bottom of the Rail.
Catalog ↗

PolyRail Stop

Bench & tubing support
Sizes
Item ALU541S · Sizes -
Best for
Stop used at both ends of each irrigation run. Includes set screw.
Catalog ↗

PolyRail Punch 25mm

Bench & tubing support
Sizes
Item ALU503A · Sizes 25mm
Best for
Punch sized for 25 mm PolyRail tubing. Item ALU503A — use ALU509A on 16 mm.
Catalog ↗

PolyRail Punch 16mm

Bench & tubing support
Sizes
Item ALU509A · Sizes 16mm
Best for
Punch sized for 16 mm PolyRail tubing, so the hole matches the fitting instead of being stretched to suit. Item ALU509A — use ALU503A on 25 mm.
Catalog ↗

PolyRail Bench Riser Base

Bench & tubing support
Sizes
Item ALUSB · Sizes -
Best for
Base for PolyRail Bench Riser Support
Catalog ↗

PolyRail Bench Riser Cap

Bench & tubing support
Sizes
Item ALUSC · Sizes -
Best for
Cap for top of PolyRail Bench Riser Support
Catalog ↗

No-Drip Riser

Bench & tubing support
Sizes
Item NDR · Sizes - · Colors -
Best for
Riser with a no-drip mechanism that shuts as pressure falls, so the nozzle does not dribble onto the crop after the cycle ends. Item NDR.
Catalog ↗

No-Drip Extension with Check Valve

Bench & tubing support
Sizes
Item NDECV · Sizes - · Colors -
Best for
No-drip riser extension with a check valve fitted — adds height and stops backflow down the riser. Item NDECV. Use the plain NDR riser where no extension is needed.
Catalog ↗

Run-Out Valve

Bench & tubing support
Sizes
Item ROV · Sizes - · Colors -
Best for
Run-Out Valves are designed to be installed at the end of 1-inch or 3/4-inch PVC pipelines. When the water is turned off, the Run-Out Valve will open and allow water to run out of the line, eliminating drip from all overhead nozzles. Run-Out Valves require at least 15 PSI to work properly. Use PVC cement and a 1 to 3/4 PVC reducer bushing to connect Run-Out Valves to 3/4-inch PVC pipelines. Follow the PVC cement directions regarding pipe preparation and drying times.
Catalog ↗

Threaded Pipe Nipple

Bench & tubing support
Sizes
Item PN-2010 · Sizes - · Colors -
Best for
The Threaded Pipe Nipple is used to attach Dramm Irrigation Nozzles directly to 1/2 PVC pipe risers. To install, simply screw the Threaded Pipe Nipple onto the threaded 1/2 PVC pipe riser. This method is ideal when you want to eliminate overhead lines or when overhead lines are impossible. 1/2 NPT X 3/8 WW . Use with 1/2 threaded PVC risers.
Catalog ↗

Slip Fit Pipe Nipple

Bench & tubing support
Sizes
Item PN-2020 · Sizes - · Colors -
Best for
The Slip Fit Pipe Nipple is used to attach Dramm Irrigation Nozzles directly to straight (unthreaded) 1/2 PVC pipe risers. To install, use PVC cement to attach the Slip Fit Pipe Nipple onto PVC pipe risers. Follow the PVC cement directions regarding pipe preparation and drying times. This method is ideal when you want to eliminate overhead lines or when overhead lines are impossible. 1/2 NPT X 3/8 WW . Use with 1/2 straight PVC risers.
Catalog ↗

Drill Tap 3/8 Whitworth Thread

Bench & tubing support
Sizes
Item DT-N · Sizes - · Colors -
Best for
Creates a 3/8 Whitworth thread in PVC for Pin-Perfect, Nifty or Misty Mist Nozzles.
Catalog ↗

3/4 Kwik Klamp

Bench & tubing support
Sizes
Item KK-75 · Sizes 3/4 in · Colors -
Best for
The Kwik Klamp is a bracket with a hinged clip that can open and close. This handy device locks shut when closed, but can be opened to remove or replace pipelines. The Kwik Klamp makes pipe installation fast and easy. Made in the Netherlands from chemical resistant polypropylene. Available for 3/4 and 1 diameter pipes. Metric and additional inch sizes are available upon special order. Use with the Kwik Spacer.
Catalog ↗

1 Kwik Klamp

Bench & tubing support
Sizes
Item KK-100, KK-125, KK-150, KK-200 · Sizes 1 in, 1.25 in, 1.5 in, 2 in · Colors -
Catalog ↗

3/4 Kwik Spacer

Bench & tubing support
Sizes
Item KS-75 · Sizes 3/4 in · Colors -
Best for
The Kwik Spacer slides into the Kwik Klamp and is used to create additional space between the pipe and wall. Multiple Kwik Spacers can be combined to create varying lengths in 3/4 increments. Made in the Netherlands from chemical resistant polypropylene. Available for 3/4 and 1 Kwik Klamps. Metric and additional inch sizes are available upon special order.
Catalog ↗

1 Kwik Spacer

Bench & tubing support
Sizes
Item KS-100, KS-125, KS-150, KS-200 · Sizes 1 in, 1.25 in, 1.5 in, 2 in · Colors -
Catalog ↗

On Dribble Tube

Bench & tubing support
Sizes
Item DTS-18, DTS-24, DTS-30, DTS-36, DTS-42, DTS-48, DTS-60, DTM-12, DTM-18, DTM-24, DTM-30, DTM-36 (+11 more) · Sizes 18 in, 24 in, 30 in, 36 in, 42 in, 48 in, 60 in, 12 in · Colors Green Tubing, Brown Tubing, Blue Tubing
Catalog ↗

Dramm Stix

Bench & tubing support
Sizes
Item SS-16, SS-24, SS-30, SS-36 · Sizes 16 in, 24 in, 30 in, 36 in · Colors -
Catalog ↗

Brass Eyelet

Bench & tubing support
Sizes
Item DTMS-E · Sizes .060 or .045 ID · Colors -
Best for
Brass eyelet. Used to install Dramm Dribble Tubes and Dribble Rings.
Catalog ↗

Valve Station

Bench & tubing support
Sizes
Item Valve Station · Sizes - · Colors -
Best for
Dramm offers preassembled valve stations as well as multi line manifolds. Build with easy maintenance in mind, Dramm pre assembled PVC components make irrigation system installation easy. Talk to Dramm about designing your irrigation system today and include Dramm pre assembled system components.
Catalog ↗

Abot/Riser Base 1.5

Bench & tubing support
Sizes
Item A-050-001-607 · Sizes 1.5 in · Colors -
Best for
The Abot Riser base connects laterals to risers.
Catalog ↗

Male End Fitting 1.5

Bench & tubing support
Sizes
Item A-050-001-616 · Sizes 1.5 in · Colors -
Catalog ↗

Female End Fitting 1.5

Bench & tubing support
Sizes
Item A-050-001-517 · Sizes 1.5 in · Colors -
Catalog ↗

Riser Pipe (Black) ED x20inch

Bench & tubing support
Sizes
Item A-032-032-450 · Sizes - · Colors -
Best for
20 inch riser section for PipeLoc. Threads into Riser Base and connects to other riser pipes to reach desired nozzle height.
Catalog ↗

Abot/Riser Base 2

Bench & tubing support
Sizes
Item A-063-001-607, A-075-001-607, A-090-001-607, A-050-050-621, A-063-063-623, A-075-050-624, A-075-063-625, A-075-075-626, A-090-050-627, A-090-063-628, A-090-075-629, A-090-090-630 (+43 more) · Sizes 2 in, 2.5 in, 3 in, 1.5 in, 2.5 in/1.5 in, 2.5 in/2 in, 3 in/1.5in, 3in/2in, 3in/2.5in, 3 in/2 in (+3 more) · Colors -
Catalog ↗

Micro-sprinkler 27

White JetRain Barbed

Micro-sprinkler
Sizes
Item JRLPC-B-WH · Sizes .48 gpm
Best for
JetRain overhead and mist nozzle, white, barbed inlet. Dramm list the white and blue at the same 0.48 gpm, with red at 0.79 gpm and yellow at 1.37 gpm — so the colour identifies the nozzle at a glance across a house rather than encoding a different flow between these two. Item JRLPC-B-WH.
Catalog ↗

Blue JetRain Barbed

Micro-sprinkler
Sizes
Item JRLPC-B-BL · Sizes .48 gpm
Best for
JetRain overhead and mist nozzle, blue, barbed inlet. Listed at the same 0.48 gpm as the white; red is 0.79 gpm and yellow 1.37 gpm. Item JRLPC-B-BL.
Catalog ↗

Red JetRain Barbed

Micro-sprinkler
Sizes
Item JRLPC-B-RD · Sizes .79 gpm
Best for
JetRain Nozzle Low Pressure with Clean Out Check Valve Barbed Inlet. For mist and irrigation.
Catalog ↗

Yellow JetRain Barbed

Micro-sprinkler
Sizes
Item JRLPC-B-YL · Sizes 1.37 gpm
Best for
JetRain Nozzle Low Pressure with Clean Out Check Valve Barbed Inlet. For heavier irrigation.
Catalog ↗

JetRain Barbed Nozzle

Micro-sprinkler
Sizes
Item JR-B · Sizes -
Best for
JetRain Nozzle Barbed with no Check Valve Barbed Inlet
Catalog ↗

White JetRain Threaded

Micro-sprinkler
Sizes
Item JRLPC-T-WH · Sizes .48 gpm
Best for
JetRain overhead and mist nozzle, white, threaded inlet for a fitting or riser. 0.48 gpm, the same as the blue; red is 0.79 gpm and yellow 1.37 gpm. Item JRLPC-T-WH.
Catalog ↗

Blue JetRain Threaded

Micro-sprinkler
Sizes
Item JRLPC-T-BL · Sizes .48 gpm
Best for
JetRain overhead and mist nozzle, blue, threaded inlet. 0.48 gpm, matching the white; red is 0.79 gpm and yellow 1.37 gpm. Item JRLPC-T-BL.
Catalog ↗

Red JetRain Threaded

Micro-sprinkler
Sizes
Item JRLPC-T-RD · Sizes .79 gpm
Best for
JetRain Nozzle Low Pressure with Clean Out Check Valve Threaded Inlet. For mist and irrigation.
Catalog ↗

Yellow JetRain Threaded

Micro-sprinkler
Sizes
Item JRLPC-T-YL · Sizes 1.37 gpm
Best for
JetRain Nozzle Low Pressure with Clean Out Check Valve Threaded Inlet. For heavier irrigation.
Catalog ↗

JetRain Threaded Nozzle

Micro-sprinkler
Sizes
Item JR-T · Sizes -
Best for
JetRain Nozzle Threaded with no Check Valve Threaded Inlet
Catalog ↗

JetRain 180 deg Nozzle Complete Barbed

Micro-sprinkler
Sizes
Item JRLPC180-B-x, JRLPC180-T-x, JRC180-xx, JR180-xx — specify color when ordering
Best for
JetRain 180 deg Pattern Barbed - Choose a color
Catalog ↗

JetRain Cleanout ADV Barbed LP

Micro-sprinkler
Sizes
Item JR-807L · Sizes -
Best for
Low-pressure JetRain cleanout with an automatic drain valve, barbed inlet — flushes the line and drains it down at shut-off. Item JR-807L; the threaded version is JR-808L.
Catalog ↗

JetRain Cleanout ADV Threaded LP

Micro-sprinkler
Sizes
Item JR-808L · Sizes -
Best for
Low-pressure JetRain cleanout with an automatic drain valve, threaded inlet. Item JR-808L; the barbed version is JR-807L.
Catalog ↗

JetRain On/Off Valve

Micro-sprinkler
Sizes
Item JRBV-750 · Sizes -
Best for
Add to a JetRain assembly to turn individual nozzles on and off.
Catalog ↗

Pin-Perfect Nozzle

Micro-sprinkler
Sizes
Item PPN-GN, PPN-GR, PPN-BL, PPN-RD, PPN-OR, PPN-BK · Sizes 2.65 mm, 2.75 mm, 2.80 mm, 2.95 mm, 3.05 mm, 3.25 mm · Colors Green, Grey, Blue, Red, Orange, Black
Catalog ↗

360° Nifty Nozzles

Micro-sprinkler
Sizes
Item 360NN-GN, 360NN-GR, 360NN-BL, 360NN-RD, 360NN-OR · Sizes 2.00 mm, 2.25 mm, 2.50 mm, 2.75 mm, 3.00 mm · Colors Green, Grey, Blue, Red, Orange
Catalog ↗

Drop Inversion Nozzle

Micro-sprinkler
Sizes
Item DDI-GG · Sizes 2.25 mm · Colors Grey / Grey
Best for
Due to a special spinning mechanism which increases the spray diameter of the Drop Inversion Nozzle, it is perfect for 24 foot wide quonset/ tunnel houses. It is used on overhead watering systems that require a larger droplet size or an extended coverage area from each nozzle. Drop Inversion Nozzles produce a 360° 24 foot diameter spray pattern and must be installed on the bottom side of the pipeline with No-Drip Extension Check Valves. To provide uniform coverage the nozzles should be spaced so that their spray patterns overlap. With the pipeline 5 feet over your crop, Drop Inversion Nozzles produce a 24 foot diameter spray pattern. Space each nozzle 12 feet apart so the spray pattern will overlap to the next nozzle. Multiple pipelines should be spaced 24 feet apart for complete coverage. To decrease the spray diameter, lower the water pipeline until the desired spray diameter is achieved. Before you begin an installation, we recommend that you install one pipeline based on the guidelines presented. After the first pipeline is installed, tested and adjusted, remaining lines can be set-up following the same specifications as the first. Use Drop Inversion Nozzles in combination with Dramm Run-Out Valves and No-Drip Extension Check Valves to control water drip.
Catalog ↗

Drop Upright Nozzle

Micro-sprinkler
Sizes
Item DDU-GB · Sizes 2.25 mm · Colors Grey / Black
Best for
The Drop Upright Nozzle has a unique spinning mechanism which increases the spray diameter of this nozzle to 30 feet when your water pipeline is 5 feet above the crop. It is used on overhead watering systems that require a larger droplet size or an extended coverage area from each nozzle. Drop Upright Nozzles produce a 360° 36 foot diameter spray pattern and must be installed on the topside of the pipeline or on top of 1/2 PVC risers. To provide uniform coverage the nozzles should be spaced so that their spray patterns overlap. With the pipeline 5 feet over your crop, Drop Upright Nozzles produce a 30 foot diameter spray pattern. Space each nozzle 15 feet apart so the spray pattern will overlap to the next nozzle. Multiple pipelines should be spaced 30 feet apart for complete coverage. To decrease the spray diameter, lower the water pipeline until the desired spray diameter is achieved. Before you begin an installation, we recommend that you install one pipeline based on the guidelines presented. After the first pipeline is installed, tested and adjusted, remaining lines can be set-up following the same specifications as the first. Use Drop Upright Nozzles in combination with Dramm Run-Out Valves, No-Drip Risers and No-Drip Extension Check Valves to control water drip.
Catalog ↗

T-Drop Nozzle

Micro-sprinkler
Sizes
Item TDN · Sizes 1.75 mm · Colors Brown / Red
Best for
The T-Drop Nozzle was created for long narrow installations in which an elliptical spray pattern is desired. T-Drop Nozzles can be installed on the topside of the pipeline, on bottom side of the pipeline or on top of 1/2 PVC risers. Bottom side installations require No-Drip Check Valves to prevent drip. To provide uniform coverage the nozzles should be spaced so that their spray patterns overlap. With the pipeline 5 feet over your crop and nozzles installed on the topside of your pipeline, T-Drop Nozzles will produce a 10 foot by 5 foot elliptical spray pattern. Space each nozzle 5 feet apart so the spray pattern will overlap to the next nozzle. Multiple pipelines should be spaced 5 feet apart for complete coverage. To increase the spray diameter of the T-Drop to 12 feet by 6 feet, install the nozzles on the bottom side of the pipeline and space the nozzles at 6 foot intervals. Multiple pipelines should be spaced 6 feet apart for complete coverage. Before you begin an installation, we recommend that you install one pipeline based on the guidelines presented. After the first pipeline is installed, tested and adjusted, remaining lines can be set-up following the same specifications as the first. Use T-Drop Nozzles in combination with Dramm Run-Out Valves, No-Drip Risers and No-Drip Extension Check Valves to control water drip.
Catalog ↗

36 Pin-Perfect Hanging Nozzle Assembly

Micro-sprinkler
Sizes
Item HNP-xx-36 · Sizes 36 inch — specify nozzle color
Best for
The Dramm Hanging Nozzle system combines the superior flow rates and water patterns of Dramm nozzles with the flexibility of a below basket hanging irrigation system. Designed for misting or irrigation of crops on benches or on the ground, the Hanging Nozzle system uses the familiar Dramm nozzles with our No Drip Extension Check Valve and a leader tube. Hanging nozzle systems offer solutions to the traditional problems of rigid pipe mounted irrigation systems. Hanging nozzle systems use a check valve and hang below the lateral which prevents dripping from the nozzle or the ™™shadow™, dripping from the lateral. Dramm Hanging Nozzle Assemblies offer even watering. Gravity ensures that the nozzles are plumb preventing pattern distortion. The entire assembly includes a leader tube with a barb fitting. The system uses flexible polyethylene tubing instead of PVC for ease of use and flexibility. A variety of leader tube lengths and nozzle choices are available. For flow rates see the specific nozzles. To install a Dramm Pin-Perfect Hanging Nozzle System. Space the nozzle assemblies at 3'™ spacings. Choose a leader tube length that places the nozzles below the hanging baskets or at a height of at least 3'™ above the crop. Choose a Pin-Perfect Nozzle to suit your needs taking into account the flow rate of each nozzle and the flow rate of the lateral.
Catalog ↗

48 Pin-Perfect Hanging Nozzle Assembly

Micro-sprinkler
Sizes
Item HNP-xx-48, HNP-xx-60 · Sizes 48 inch, 60 inch — specify nozzle color
Catalog ↗

180° Nylon Nozzle

Micro-sprinkler
Sizes
Item 180NY-RD · Sizes - · Colors Red
Best for
180° spray pattern. Push into flexible 1/2 black poly tubing for perimeter watering. Use in conjunction with 90° Nylon Nozzle.
Catalog ↗

90° Nylon Nozzle

Micro-sprinkler
Sizes
Item 90NY-GR · Sizes - · Colors Grey
Best for
90° spray pattern. Push into flexible 1/2 black poly tubing for perimeter watering. Use in conjunction with 180° Nylon Nozzle.
Catalog ↗

S10 - 1/2MPT ADPT-GREEN PLATE-nozzle select

Micro-sprinkler
Sizes
Item N-12884-11XX · Sizes - · Colors -
Best for
#10,11,12,13,14,15,16,17,18,20 - Green #1, Black#2, Gray#3
Catalog ↗

R10 Rotator - 1/2MPT ADPT-RED PLATE-nozzle select

Micro-sprinkler
Sizes
Item N-9913-11XX · Sizes - · Colors -
Best for
#40, 45, 50, 55, 60 - Red #1 , White #2, Orange #7
Catalog ↗

R2000WF Rotator - 1/2MPT ADPT-BLUE PLATE-nozzle select

Micro-sprinkler
Sizes
Item N-9928-10XX · Sizes - · Colors -
Best for
#10,11,12,13,14,15,16,18,20 - Blue #10, Purple #12, Green #14, Red #16, Yellow #18, Brown #20 Purple, Ivory
Catalog ↗

D10 - 1/2MPT ADPT-GRN PLATE-nozzle select

Micro-sprinkler
Sizes
Item N-12928-10XX, N-9914-13XX, N-12927-11XX, N-9929-10XX, N-13827-12XX · Sizes - · Colors -
Best for
#10,11,12,13,14,15,16,17,18,20 - Standard flat Black plate
Catalog ↗

Poly tubing 5

Poly Tubing -.045 ID X .100 OD

Poly tubing
Sizes
Item O45 · Sizes 5,000 feet/ roll · Colors Green
Best for
Small leader tube for Dramm Dribble Tubes.
Catalog ↗

Poly Tubing -.060 ID X .100 OD

Poly tubing
Sizes
Item O6O · Sizes 5,000 feet/ roll · Colors Brown
Best for
Medium leader tube for Dramm Dribble Tubes.
Catalog ↗

Poly Tubing - .075 ID X .125 OD

Poly tubing
Sizes
Item O75 · Sizes 5,000 feet/ roll · Colors Blue
Best for
Large leader tube for Dramm Dribble Tubes.
Catalog ↗

Poly Tubing - .130 ID X .192 OD

Poly tubing
Sizes
Item 192 · Sizes 2,500 feet/ roll · Colors Black
Catalog ↗

Polyethylene Irrigation Line

Poly tubing
Sizes
Item PE tubing · Sizes 16mm or 25mm · Colors -
Best for
Dramm PE tubing is available in 16mm and 25mm (3/4) in various lengths. Call for sizing and pricing.
Catalog ↗

AC solenoid valve 2

3/4 in NPT Dramm Solenoid Valve

AC solenoid valve
Sizes
Item SVB075 · Sizes 3/4 in - 24VAC 1.2 W · Colors -
Best for
Dramm's ultra-durable solenoids are designed to outlast the competition and shut-off rapidly. Perfect for misting systems, where an extra second or two is more water than needed, the SVB range of solenoids are fast acting.
Catalog ↗

1 in NPT Dramm Solenoid Valve

AC solenoid valve
Sizes
Item SVB100, SVB150, SVB200 · Sizes 1 in - 24VAC 1.2 W, 1.5 in - 24VAC 1.2 W, 2 in - 24VAC 1.2 W · Colors -
Best for
Dramm Solenoid Valve - 1 National Pipe Thread
Catalog ↗

DC Controller 2

ii ri Smart Controller w Coil

DC Controller
Sizes
Item iiri3v · Sizes 3/4 in. valve · Colors -
Best for
The ii ri Smart Controller is a battery operated, Bluetooth Connected, irrigation/misting controller that can oprate one solenoid valve without wiring. Create different programs on your smartphone and upload them to your ii ri easily to change scenarios. Great for quick installations, single propagation benches, outdoor mum fields and more.
Catalog ↗

ii ri Smart Controller on 3/4 in. Solenoid

DC Controller
Sizes
Item iiriSVB075, iiriSVB100 · Sizes 3/4 in. valve, 1 in. valve · Colors -
Best for
Ii ri Smart Controller including 3/4 solenoid valve.
Catalog ↗

Dramm by category

Watering tool·Accessory·Hose & fittings·Mister & fogger·Fertilizer injector·Spray stakes & emitters·Chemical application·AC Controller·Specialized tool·Bench & tubing support·Micro-sprinkler·Poly tubing·AC solenoid valve·DC Controller