MLML Irrigation

ML Irrigation / Products / DC Latching Solenoid Valves

DC Latching Solenoid Valves

Latching solenoid valves for battery-powered controllers, where there is no power at the valve.

17 products · 5 manufacturers · wholesale · ships nationwide

Request a quote

Bermad

IR-21T (DC latching)

DC latching solenoid valve
Pressure
Rated 150 psi; operating range 10–150 psi
Connection
2-way internal control loop; takes the S-392-T-2W latching solenoid
Sizes
3/4", 1", 1½", 2" (DN20–DN50) — globe or angle; Cv 10 on 3/4"–1", 43–47 on 1½", 54–60 on 2"
Best for
200 Series 2-way valve with a latching solenoid — closes drip-tight on a battery pulse, and the Trio solenoid keeps the 3-position manual override at the valve
Catalog ↗

IR-210 (DC latching)

DC latching solenoid valve
Pressure
Rated 150 psi; operating range 10–150 psi
Connection
Threaded globe or angle; takes the S-392-T-3W latching solenoid
Sizes
3/4", 1", 1½", 2" (DN20–DN50) — globe or angle; Cv 10 on 3/4"–1", 43–47 on 1½", 54–60 on 2"
Best for
The 200 Series valve ordered with a latching solenoid instead of the AC one — the small 3/4" and 1" sizes most greenhouse and nursery zones actually use, running off a battery or solar controller. Engineered composite body, NBR diaphragm, stainless spring
Catalog ↗

IR-110-DC Double Chamber

DC latching solenoid valve
Pressure
Rated 150 psi; operating range 7–150 psi
Connection
Threaded or plastic flanges; takes the S-982-3W latching solenoid
Sizes
1½", 2", 2"L, 2½", 3", 4"
Best for
The 100-DC Series — a double-chambered valve that is fully powered both opening and closing, so it works at low pressure where a single-chamber valve will not, and closes drip-tight. Built for battery and solar controllers: the latching solenoid draws power only in the instant it switches, so a remote block with no mains power can still be automated. Engineered composite body
Catalog ↗

IR-120-DC Double Chamber

DC latching solenoid valve
Pressure
Rated 150 psi; operating range 7–150 psi; pilot spring 3–25 psi (green), 7–43 psi, 12–95 psi or 15–150 psi
Sizes
1½", 2", 2½", 3", 4"
Best for
Pressure reducing and battery-powered on/off in one valve — it holds a constant downstream pressure and switches on a latching pulse from a DC controller. Double-chambered, so it is fully powered both opening and closing and will work at low pressure where a single-chamber valve stalls. hYflow "Y" body for high flow at low loss. Uses the S-982-3W latching solenoid
Catalog ↗

IR-130-DC Double Chamber

DC latching solenoid valve
Pressure
Rated 150 psi; operating range 7–150 psi; pilot spring 3–25 psi (green) and higher ranges
Sizes
1½", 2", 2½", 3", 4"
Best for
Pressure sustaining plus battery-powered on/off in one valve — holds minimum upstream pressure so remote or elevated plots do not starve, and switches on a latching pulse. Double-chambered for full-powered opening and closing at low pressure. Uses the S-982-3W latching solenoid
Catalog ↗

Netafim

Series 80 Nylon (12 VDC latching)

DC latching solenoid valve
Flow
3/4" 0.01–26 gpm · 1" 0.01–44 gpm · 1½" 0.25–110 gpm · 2" 0.25–176 gpm
Pressure
7–150 psi; max water 140°F
Connection
12 VDC latching solenoid; pairs with the Aqua Pro single-zone controller, which mounts on the valve and runs off one 9 VDC battery
Sizes
3/4", 1", 1½", 2" — 3/4" and 1" globe; 1½" and 2" globe or angle
Best for
Series 80 with the latching solenoid — automatic operation with no wiring cost at all. The Aqua Pro controller bolts to each valve and is programmed individually, so you can automate one bench or one hoop house without running a single wire. Ideal for seasonal crops where the system gets moved
Catalog ↗

Battery Operated Control Valve

DC latching solenoid valve
Connection
3-way valves take a 12 VDC Aquative latching solenoid; 2-way valves a 12 VDC latching solenoid
Sizes
Available on any Netafim nylon, PVC, iron or bronze valve body
Best for
Automation where power or wiring is not available or not worth the cost. The battery-operated Aqua Pro single-valve controller runs the whole thing off one 9 V battery. Corrosion-proof components and a water-resistant controller, indoor or outdoor. Retrofits an existing manual system, and you can still add pressure reducing or any other control function on the same valve. Good fit for seasonal crops where the system moves
Catalog ↗

Rivulis

V1000 (9 V DC latching)

DC latching solenoid valve
Connection
9 V DC latching solenoid; 2-way internal or 3-way external circuit; BSP/NPT
Sizes
1" in-line, 1½" in-line, 2" in-line, 2" angle
Best for
The V1000 ordered with a 9 V DC latching solenoid for battery controllers on small farms and landscape jobs where running 24 V wire is not worth it. Keeps the manual throttling knob and the internal 2-way circuit
Catalog ↗

V2000 (9 V DC latching)

DC latching solenoid valve
Pressure
To 145 psi (10 bar)
Connection
3W 9 V DC latching solenoid
Sizes
2"L, 3", 3"L, 4", 6" — BSP/NPT or flange
Best for
The V2000 plastic body with a 9 V DC latching solenoid for battery-powered control. Oval diaphragm keeps head loss down
Catalog ↗

Hunter

PGV Series (DC latching)

DC latching solenoid valve
Flow
0.2–40 gpm (0.7–150 l/min) on the 1"
Pressure
Temperature rating 150°F (66°C)
Sizes
1" (PGV-100G globe, PGV-100A angle, PGV-101), 1½" (PGV-151), 2" (PGV-201)
Best for
The standard PGV ordered with a DC latching solenoid instead of the 24 VAC one, so it runs from a Hunter battery-powered controller. Rugged supported diaphragm with a double-beaded seal; low-flow capability means it will drive micro-irrigation zones, not just sprinklers. Pairs with Accu-Sync for pressure regulation
Catalog ↗

ICV Series (DC latching)

DC latching solenoid valve
Pressure
Operates continuously to 220 psi
Sizes
1½", 2", 3" (ICV-301G)
Best for
Hunter’s commercial valve ordered with a DC latching solenoid for battery-powered control on larger mainlines. Captive bonnet bolts for hassle-free maintenance
Catalog ↗

Superior

SPVLF / SPV (DC latching)

DC latching solenoid valve
Flow
0.25–200 gpm
Pressure
20–200 psi. DC latching pulse 9–24 V DC, pulse width 30–50 mS
Sizes
SPV 1", 1½", 2" with the optional DC latching solenoid
Best for
The plastic SPV specified with the optional latching solenoid, for battery and solar controllers where there is no mains at the valve box. Identical body, scrubber rod and EPDM diaphragm as the AC version — only the solenoid changes, so spares are shared. Note the low-flow SPVLF is AC only
Catalog ↗

450 (DC latching)

DC latching solenoid valve
Flow
0.075–40 gpm
Pressure
20–150 psi. DC latching pulse 9–24 V DC, pulse width 30–50 mS
Sizes
3/4" (450075), 1" (450100) with the optional DC latching solenoid
Best for
The small 450 on a latching solenoid — the combination to use for a battery-run micro zone, since its 0.075 gpm minimum is low enough for drip and micro-sprinkler laterals. Mineral-reinforced nylon with moulded brass inserts
Catalog ↗

LCV (DC latching)

DC latching solenoid valve
Flow
0.25–40 gpm
Pressure
15–150 psi. DC latching pulse 9–24 V DC, pulse width 30–50 mS
Sizes
1" — LCV100F, LCV100FS, LCV100S with the optional DC latching solenoid
Best for
UPVC light commercial valve in latching form. Already 2-wire compatible, so this is the version that pairs with a decoder system rather than a conventional multi-core run
Catalog ↗

950 (DC latching)

DC latching solenoid valve
Flow
5–320 gpm
Pressure
20–200 psi, to 180°F. DC latching pulse 9–24 V DC, pulse width 30–50 mS
Sizes
3/4" to 3" — 950075 through 950300 with the optional DC latching solenoid
Best for
The red brass 950 on a latching solenoid, for a remote mainline valve with no power to it. Same 180°F rating and 320 gpm capacity as the AC build
Catalog ↗

950A (DC latching)

DC latching solenoid valve
Flow
5–200 gpm
Pressure
20–200 psi, to 180°F. DC latching pulse 9–24 V DC, pulse width 30–50 mS
Sizes
1", 1½", 2" — 950A100, 950A150, 950A200 with the optional DC latching solenoid
Best for
Angle-pattern brass valve in latching form, for a vertical riser on a battery-controlled block
Catalog ↗

3200 Master Valve (DC latching)

DC latching solenoid valve
Flow
0–320 gpm — no minimum flow requirement
Pressure
20–200 psi. DC latching pulse 9–24 V DC, pulse width 30–50 mS
Sizes
3/4" to 3" — 3200075 through 3200300 with the optional DC latching solenoid
Best for
Mainline shutoff on a battery or solar controller. The dual-chamber no-minimum-flow design matters more here than on a zone valve, because a master valve has to seat reliably whatever the system happens to be drawing. The normally open 3300 has no latching option
Catalog ↗

Other product categories

AC Irrigation Controllers · AC Solenoid Valves · Accessories & Spare Parts · Air & Vacuum Vents · Bench & Tubing Support · Chlorination · DC & Battery Irrigation Controllers · Drip Tape · Dripline · Fertilizer Injectors · Filtration · Hand Watering Tools · Hanging Basket Assemblies · Hose, PVC & Fittings · Layflat Hose · Metal Impact Sprinklers · Micro-Sprinklers · Misters & Foggers · Multi-Outlet Drippers (MODS) · Oval Hose · Plastic Impact Sprinklers · Poly Tubing · Pressure Reducing Valves · Pressure Regulators · Pressure Sustaining Valves · Pumps & Pump Control · Specialized Tools · Spray & Fogging Equipment · Spray Stakes & Emitters · Water Meters · Wire & Cable · Wobblers