Wholesale irrigation products by category

Thin-wall drip tape for row crops and container production — wall thickness, emitter spacing and flow rates across five manufacturers.

Pressure-compensating and non-PC dripline in thin and heavy wall, for rows, containers and benches.

Blank polyethylene tubing for laterals and submains, in the diameters and coil lengths production growers actually run.

Oval and lay-flat poly hose — a cost-effective alternative to rigid pipe for distribution.

PE and PVC lay-flat hose for mainlines and manifolds, including pre-installed outlet versions.

Schedule 40 and 80 PVC fittings and ball valves, plus compression, insert and barbed fittings, hose reels and couplings.

Button emitters, PC drippers, spray stakes and drip assemblies for container and pot production.

Multi-outlet dripper assemblies for container production — one dripper feeding several pots.

Drop assemblies and hanging nozzle systems for irrigating baskets above a crop.

Micro-sprinklers, jets and spinners for propagation, overhead and under-canopy irrigation in nurseries and greenhouses.

Foggers and misters for propagation, cooling and humidity control, with droplet sizes and filtration requirements.

Plastic impact sprinklers for can yards, open ground and frost protection — flow rates, trajectories and throw diameters.

Brass and metal impact sprinklers for production growing, full and part circle.

Off-centre rotary wobbler sprinklers for gentle, uniform coverage at low pressure.

Screen, disc, media and automatic self-cleaning filters sized to flow rate and water quality.

Proportional injectors, dosing pumps and venturi fertigation systems for accurate nutrient delivery.

Calcium hypochlorite tablet chlorination for irrigation source water — keeps biofilm and algae out of the lines.

Turbine, multi-jet, ultrasonic and electromagnetic meters for measuring irrigation and fertilizer flow.

Plastic and metal solenoid control valves on 24 VAC, from ¾" greenhouse zones to mainline sizes.

Latching solenoid valves for battery-powered controllers, where there is no power at the valve.

Hydraulic control valves holding a constant downstream pressure, in plastic and metal bodies.

Valves holding a minimum upstream pressure so the far end of a system still gets water.

Inline regulators holding a set outlet pressure on drip and micro zones — factory-preset models and adjustable units that mount straight onto a control valve.

Kinetic, automatic and combination air valves to release air on fill and prevent pipe collapse on shutdown.

Mains-powered irrigation, fertigation and environmental controllers, from single zones to cloud-managed multi-zone systems.

Battery-powered latching controllers for valves with no power run to them — sillcock timers to full field controllers.

Self-priming, straight centrifugal and submersible irrigation pumps, packaged pump systems and enclosures, plus constant-pressure pump control valves.

Pump start relays, run-dry and dead-head protection, float and liquid level controls, pressure and flow switches, and combination starter panels.

Direct-burial valve wire, 2-wire decoder cable, waterproof splices, grounding and submersible pump cable for irrigation control.

Water breakers, wands, valves, watering cans and hose-end tools built for daily commercial use.

Cold foggers, backpack and cart sprayers, PulsFOG units and application equipment for greenhouse chemistry.

PolyRail, risers, stakes, clamps and the hardware that holds an irrigation system in place.

Punches, inserters, reamers, drills and the tools for building and repairing drip systems.

Repair kits, replacement parts, service tools and anti-drain devices for the equipment you already run.