Irritec Products — Wholesale Distributor | ML Irrigation

ML Irrigation / Manufacturers / Irritec

Irritec are an Italian micro-irrigation maker with a broad range across tape, dripline, tubing and fittings. Their eXXtreme tape and P1 and Apex dripline sit comfortably alongside the bigger names, and the fittings range is genuinely useful when you are joining products from several manufacturers on the same block.

18 products · 9 categories · wholesale · ships nationwide

Irritec answer scripted requests with a challenge page, so some of their documents cannot be linked directly. Ask us for any spec sheet you cannot reach.

Request a quote

Drip tape 2

IrritecTape

Drip tape

Diameter: 16 & 22 mm (5/8", 7/8")
Wall: 5–15 mil
Emitter spacing: 4"–12"
Flow: 0.07–0.28 gph @ 8 psi (0.18–1.41 gpm/100 ft)
Pressure: 4 psi min; 10–15 psi max
Pressure comp.: No · PC dripline alternative: Apex PC
Best for: Row crops (surface/subsurface/under mulch); greenhouse; close spacing

eXXtreme Tape

Drip tape

Diameter: 16 & 22 mm
Wall: 5–15 mil
Emitter spacing: 3"–12"
Flow: 0.14–0.28 gph @ 8 psi (0.24–1.41 gpm/100 ft)
Pressure: 4 psi min; 10–15 psi max
Pressure comp.: No · PC dripline alternative: Apex PC
Best for: High-density plantings, sandy soils, hard-water / tough conditions

Dripline 4

P1

Dripline

Diameter: 16 & 22 mm (EU also 12/25/29)
Wall: 6–15 mil (P1 / P1 Ultra)
Emitter spacing: ≥8" (20/30/40 cm)
Flow: 0.16–0.55 gph @ 1.0 bar
Pressure: 7–36 psi
Pressure comp.: No · PC version: Multibar F or Apex PC
Best for: Wide spacings, long runs; seasonal & multi-season; sub-irrigation

Apex PC

Dripline

Diameter: 17 mm (.560" ID), 18 mm (.620"), 20 mm (.690")
Wall: 45–50 mil
Emitter spacing: 18"–48"
Flow: 0.33, 0.42, 0.55 & 1.0 gph
Pressure: 7–60 psi
Pressure comp.: Yes (CV <5%) · Non-PC version: D7
Coil lengths: 1,000'
Best for: Permanent crops — nut trees, fruit trees and vineyards. 120 mesh filtration, 7-year non-prorated warranty; optional white skin for greenhouse use

D7

Dripline

Diameter: 16 / 18 / 20 / 23 mm
Wall: 45–47.5 mil
Emitter spacing: 12"–48"
Flow: 0.29–1.00 gph
Pressure: 5–50 psi
Pressure comp.: No · PC version: Multibar F or Apex PC
Best for: Permanent crops where PC isn't needed; flatter terrain, flexible spacing

Multibar F

Dripline

Diameter: 16 / 18 / 20 / 23 mm
Wall: 45–47.5 mil
Emitter spacing: 12"–48"
Flow: 0.29–1.00 gph @ 30 psi
Pressure: 7–12 psi min (PC)
Pressure comp.: Yes (CV <4%) · Non-PC version: D7
Best for: Permanent crops on severe slopes / long runs; surface & subsurface (AS)

Poly tubing 1

PE Tubing

Poly tubing

Diameter: .520"–1.06" ID (.620"–1.18" OD)
Wall: .045", .0475", .050", .055" & .060"
Pressure: 47–66 psi working (by size and wall)
Coil lengths: cut lengths, 100', 500' & 1,000'
Sizes: 16, 18, 20, 25 & 32 mm nominal (1/2"–1-1/4")
Best for: Laterals, manifolds and distribution lines. Low-density resins with exceptional UV and acid resistance; seven-year non-prorated warranty

Oval hose 1

PE Oval Hose

Oval hose

Diameter: 2", 3" & 4"
Pressure: 21 psi
Coil lengths: 2": 225' · 3": 200' · 4": 131'
Best for: Cost-effective alternative to rigid pipe for distribution; unique bale style rolls up for easy retrieval and relocation

Layflat 2

FlexiFlat LayFlat Hose (PVC)

Layflat

Diameter: 2", 3", 4", 6" & 8"
Pressure: 70 psi (2"–4") · 50 psi (6") · 40 psi (8")
Coil lengths: 328' bales
Best for: Distribution manifolds and transport lines. PVC reinforced with 3-ply polyester yarns, UV resistant; lays flat so it will not tangle or kink

FlexiFlat PE Layflat Hose

Layflat

Diameter: 3", 4" & 6"
Pressure: 25 psi with outlets · 35 psi blank
Coil lengths: 328' (3", 4" & 6")
Sizes: Outlet spacings 20"–80" (by size)
Best for: Soft, flexible PE layflat with 3-ply polyester yarns and simultaneous extrusion for maximum bonding — farm equipment can drive over it. Rated -4°F to 158°F

Micro-sprinkler 2

SpinRite PC

Micro-sprinkler

Pressure comp.: Yes
Best for: Single-stage, or two-stage with a Range Limiter spinner for young trees — snap off the limiter tab once the trees mature

866 / 866PC

Micro-sprinkler

Pressure comp.: PC version available (866PC)
Best for: Micro-sprinkler available in standard and pressure-compensating versions

Filtration 4

Metal Screen Filters

Filtration

Best for: Irritec design and build their own filters. Simple construction, and the hydraulic capacity holds up through pressure swings and external stress rather than distorting

Metal Sand Media Filters

Filtration

Best for: Media filtration for surface water with an organic load that blinds a screen

Plastic Screen Filters

Filtration

Best for: Light plastic screen filter for a greenhouse head or a small block

Plastic Disc Filters

Filtration

Best for: Disc element gives depth filtration, holding organic matter a screen of the same rating would pass or blind on

Hose & fittings 1

PVC Ball Valves

Hose & fittings

Connection: Schedule 40 PVC, UV protected
Best for: UV-protected Schedule 40 PVC that resists fertilisers and chemicals, and stays easy to open and close after a season in the sun

Air vent 1

Air Vents

Air vent

Best for: Controls air intake and release on Irritec lines — dumps air on fill, admits it on shutdown so the pipe cannot collapse

Irritec by category

Drip tape·Dripline·Poly tubing·Oval hose·Layflat·Micro-sprinkler·Filtration·Hose & fittings·Air vent