ML Irrigation / Manufacturers / Maxijet

Maxijet

Maxijet build micro-sprinklers and spray assemblies aimed squarely at container production and protected cropping — the sort of gear that goes on a pot-in-pot block or over a growing-on bed rather than into a field.

10 products · 3 categories · wholesale · ships nationwide

Ask us for the throw diameter at your operating pressure rather than the catalogue figure. Micro-sprinkler coverage moves a long way between 20 and 40 psi.

Request a quote

Micro-sprinkler 8

Max-14 Fill-In

Micro-sprinkler
Flow
5.6, 7.7, 10.5 & 13.5 gph @ 20 psi (orifice .03"–.044")
Trajectory
+15°
Throw diameter
8.5–17 ft
Best for
Mature fruit trees and shrubs — 14 wide streams for a filled-in 360° pattern. 10-32 triple-lead threads for 2-turn installation
Catalog ↗

Max-14 Stream

Micro-sprinkler
Flow
5.6, 7.7, 10.5 & 13.5 gph @ 20 psi (orifice .03"–.044")
Trajectory
+18°
Throw diameter
10.5–18 ft
Best for
14 narrow streams for a large 360° pattern where reach matters more than fill
Catalog ↗

Max-12 Fill-In 300°

Micro-sprinkler
Flow
5.6, 7.7, 10.5 & 13.5 gph @ 20 psi (orifice .03"–.044")
Trajectory
+15°
Throw diameter
9–18 ft
Best for
300° pattern with a break that avoids spraying trunks
Catalog ↗

Max-12 HDR Down Fill-In

Micro-sprinkler
Flow
5.6, 7.7, 10.5 & 13.5 gph @ 20 psi (orifice .03"–.044")
Trajectory
−8°
Throw diameter
5.5–7 ft
Best for
High-density plantings — 12 down streams for a tight filled-in 360° pattern
Catalog ↗

Max-10 Fill-In 240°

Micro-sprinkler
Flow
5.6, 7.7, 10.5 & 13.5 gph @ 20 psi (orifice .03"–.044")
Trajectory
+15°
Radius
4.5–6 ft
Best for
240° filled-in 10-stream pattern for edge rows and against structures
Catalog ↗

Winged One-Piece Jet Spinners

Micro-sprinkler
Best for
Rotating spinner head for wider, softer coverage than a fixed jet
Catalog ↗

Two-Piece Jets (Deflector with Base)

Micro-sprinkler
Best for
Deflector-and-base design so the pattern can be changed without replacing the base
Catalog ↗

Stake-Mounted Micro-Sprinkler Assemblies

Micro-sprinkler
Connection
Barbed adapter chosen to suit the water-source connection
Sizes
Stakes 6", 13" and tall 13" · black, orange, green, tan · clip or barb · .205" OD and .240 vinyl tubing
Best for
Maxijet custom-assemble these: your choice of micro-spray pattern and GPH, vinyl tubing cut length and colour, stake style, and the barbed adapter that fits your line — supplied made up rather than built on the bench. Stakes come in 6", 13" and tall 13", in black, orange, green and tan — high-visibility colours for agriculture, muted ones for landscape where you would rather not see them. Clip and barb styles: vinyl snaps into the clip, or pushes onto the barb. Both suit .205" OD and .240 vinyl tubing. The 13" stakes have a built-in side hole that holds the tubing tucked in rather than flapping loose, and some carry a second hole that grips crimped vinyl to shut off flow to that head — so one pot can be taken out of service without cutting anything. Call the factory for pricing on custom assemblies
Catalog ↗

Multi-outlet dripper (MODS) 1

Dual, Barb & Spider Stake Assemblies

Multi-outlet dripper (MODS)
Sizes
Dual, barb and spider assemblies; stakes 6", 13" and tall 13"
Best for
The multi-outlet side of the Maxijet stake range — a spider assembly feeds several containers from one take-off, so a bed of pots runs off a single outlet. Stakes come in 6", 13" and tall 13", in black, orange, green and tan — high-visibility colours for agriculture, muted ones for landscape where you would rather not see them. Clip and barb styles: vinyl snaps into the clip, or pushes onto the barb. Both suit .205" OD and .240 vinyl tubing. The 13" stakes have a built-in side hole that holds the tubing tucked in rather than flapping loose, and some carry a second hole that grips crimped vinyl to shut off flow to that head — so one pot can be taken out of service without cutting anything. Also listed under Micro-sprinklers, where the same assemblies appear as stake-mounted heads
Catalog ↗

Bench & tubing support 1

Stakes

Bench & tubing support
Connection
Takes .205" OD and .240 vinyl tubing
Sizes
6", 13" and tall 13"; black, orange, green and tan; clip or barb style
Best for
The bare stakes, sold without the assembly. UV-stabilised resin so they survive years of weather rather than going brittle in one season. Stakes come in 6", 13" and tall 13", in black, orange, green and tan — high-visibility colours for agriculture, muted ones for landscape where you would rather not see them. Clip and barb styles: vinyl snaps into the clip, or pushes onto the barb. Both suit .205" OD and .240 vinyl tubing. The 13" stakes have a built-in side hole that holds the tubing tucked in rather than flapping loose, and some carry a second hole that grips crimped vinyl to shut off flow to that head — so one pot can be taken out of service without cutting anything.
Catalog ↗

Maxijet by category

Micro-sprinkler·Multi-outlet dripper (MODS)·Bench & tubing support