Rain Bird Products — Wholesale Distributor | ML Irrigation

ML Irrigation / Manufacturers / Rain Bird

Rain Bird's agricultural line centres on the GritX dripline family — built for water with grit in it, which is most surface and recycled supply — plus the XFD and XFS ranges for on-surface and subsurface work. Filters, control valves and PRS pressure-regulating stems complete the head end.

28 products · 8 categories · wholesale · ships nationwide

Request a quote

Dripline 6

GritX PC Heavywall

Dripline

Diameter: 16 / 18 / 20 mm
Wall: 35–50 mil
Emitter spacing: 18"–60" standard (6"–96" custom)
Flow: 0.26–1.06 gph
Pressure: 7–60 psi
Pressure comp.: Yes · Rain Bird ag dripline is PC only
Best for: On-surface permanent crops, orchards & vineyards; poor water

GritX SDI

Dripline

Diameter: 16 / 18 / 20 mm
Wall: 35–48 mil
Emitter spacing: 6"–96" patterns
Flow: 0.46 gph (1.7 l/h)
Pressure: 15–60 psi
Pressure comp.: Yes (+ Copper Shield) · Rain Bird ag dripline is PC only
Best for: Subsurface drip for tree crops & vineyard

GritX DSV

Dripline

Diameter: 16 / 18 / 20 mm
Wall: 35–48 mil
Emitter spacing: 6"–96" patterns
Flow: 0.46 gph (1.7 l/h)
Pressure: 15–60 psi
Pressure comp.: Yes (anti-drain/anti-siphon) · Rain Bird ag dripline is PC only
Best for: Tree crops & vines needing backflow prevention

XFD On-Surface Dripline

Dripline

Pressure comp.: Yes
Best for: Rain Bird call it the most flexible pressure-compensating inline emitter tubing made — it lies into ground cover, dense plantings and hedge rows without fighting the curve. The low-profile emitter cuts in-line pressure loss, so laterals run longer

XFS Subsurface Dripline

Dripline

Pressure comp.: Yes
Best for: Copper Shield technology stops roots growing into the emitters without harsh chemicals or treated filters — the usual failure mode for buried dripline

XFS-CV Subsurface Dripline

Dripline

Pressure: 4.3 psi check valve in every emitter
Pressure comp.: Yes
Best for: Every emitter carries a 4.3 psi check valve, holding the line charged across elevation changes of more than ten feet — Rain Bird say the highest hold-back in the industry. Keeps Copper Shield root protection as well, so a sloping bed does not drain down to the bottom emitters after every cycle

Metal impact sprinkler 8

14VH

Metal impact sprinkler

Flow: 0.56–2.68 gpm
Pressure: 20–60 psi
Connection: 1/2" male NPT
Trajectory: 23°
Radius: 29–38 ft
Best for: Low pressure and low flow where grit is abundant — patented self-flushing nylon "V" wedge is replaceable, extending arm life

20JH

Metal impact sprinkler

Flow: 2.0–5.47 gpm
Pressure: 35–60 psi
Radius: 38–44 ft
Best for: General solid set; brass straight-bore nozzle

30H / 30WH

Metal impact sprinkler

Flow: 2.9–13.1 gpm
Pressure: 25–80 psi
Radius: 40–56 ft
Best for: Wide operating range; 30H with spreader, 30WH plugged

30FH / 30FWH

Metal impact sprinkler

Flow: 2.26–6.47 gpm
Pressure: 25–80 psi
Radius: 39–43 ft
Best for: Tighter pattern than the 30H; 30FH with spreader, 30FWH plugged

65PJ

Metal impact sprinkler

Flow: 12.9–16.5 gpm
Pressure: 50–80 psi
Radius: 57–65 ft
Best for: Higher pressure solid set needing long throw

85EHD

Metal impact sprinkler

Flow: 17.1–127.7 gpm
Pressure: 25–100 psi
Radius: 61–116 ft
Best for: Largest throw in the Rain Bird ag range — widest spacings and frost protection

25BPJ-FP

Metal impact sprinkler

Flow: 3.1–5.0 gpm
Pressure: 30–50 psi
Radius: 38–41 ft
Best for: Part-circle brass precision jet for field edges and headlands

35A-TNT / 35A-ADJ

Metal impact sprinkler

Flow: 3.9–7.8 gpm
Pressure: 30–60 psi
Radius: 42–51 ft
Best for: Part-circle brass spoon drive; TNT washer stack or adjustable-nozzle version

Plastic impact sprinkler 1

2045-PJ (Maxi-Bird)

Plastic impact sprinkler

Flow: 1.5–8.4 gpm
Pressure: 25–60 psi
Connection: 1/2" male NPT, plastic bearing
Trajectory: 23° standard, 10° low-angle available
Radius: 22–45 ft
Best for: Rain Bird calls it a workhorse for nursery use — greenhouse, nursery, can yards and climate control. Delrin plastic, trip collars adjust 20°–360°, patented Precision-Jet S-tube stops side splash, five colour-coded Quick Fit nozzles. Good grit and chemical resistance for dirty water

Micro-sprinkler 2

Micro Bird Jet

Micro-sprinkler

Flow: 3.7–37.5 gph (14–142 l/h)
Pressure: 10–30 psi (0.7–2.1 bar)
Connection: 5 mm or 1/4" tubing barb
Throw diameter: 3–33 ft (0.9–10.1 m)
Sizes: Snap-fit nozzles MBJ05 (.026"), MBJ08 (.033") and up; 8 deflector patterns
Best for: Snap-fit nozzles and deflectors assemble and clean without tools. Reversible dual-pattern deflector flips to change the wetted area as the crop matures. 150-mesh filtration recommended. Ships factory-assembled or as loose components

LFX / LF Series Low Flow Sprinklers

Micro-sprinkler

Flow: 0.28–2.12 gpm (62–469 l/h)
Pressure: 25–50 psi (1.72–3.45 bar)
Connection: ACME or 1/2" MNPT
Radius: 18–31 ft (5.5–9.4 m) — LFX300 18–25 ft, LFX600 22–31 ft
Best for: Rain Curtain technology for even distribution and gentle close-in watering that will not wash out media. Snap-fit brake assemblies and nozzles change without tools. Optional flow-control (FC) nozzles hold output steady as pressure varies — LFX300 at 0.35 / 0.43 / 0.50 gpm, LFX600 at 0.75 / 1.00 gpm. Snap-on edge guard and stream splitters available

AC Controller 6

ESP-LXME2 / ESP-LXME2 PRO

AC Controller

Best for: Modular commercial controller with a large display and a hand/off/auto dial. Non-volatile memory keeps the schedule and a lithium coin cell holds time and date through an outage, so a power cut does not cost you the programme. English and Spanish

ESP-TM2 Series

AC Controller

Connection: 120 V indoor/outdoor; LNK WiFi module compatible
Sizes: 4, 6, 8 and 12 stations
Best for: The practical mid-range Rain Bird controller, indoor or outdoor rated, with Wi-Fi available through the LNK module rather than built in — so the cost only lands if the site wants it

ESP-Me3

AC Controller

Connection: LNK2 WiFi compatible
Best for: Modular controller that takes the LNK2 Wi-Fi module for app control and remote scheduling

ESP-LXD Decoder Controller

AC Controller

Best for: Rain Bird’s two-wire decoder platform — one cable path with decoders at the valves, for large or awkward sites where home-run wiring is impractical

ESP-LXIVM Series

AC Controller

Connection: LNK2 WiFi compatible
Best for: Decoder controller built around integrated valve modules, with the diagnostics to find a fault on the two-wire path rather than digging to look for it

LNK2 WiFi Module

AC Controller

Connection: Fits ESP-Me, ESP-ME3, ESP-TM2, RZXe, ESP-LXME2 and ESP-LXIVM
Best for: Adds Wi-Fi and app control to a controller already installed — six model families supported, so an existing site can go remote without new hardware in the cabinet

DC Controller 3

TBOS-BT Series

DC Controller

Connection: One 9 V alkaline battery, type 6AM6 / 6LR61
Sizes: 1, 2, 4 and 6 stations — TBOS-BT (mobile app or handheld transmitter) and TBOS-BT-LT (app only)
Best for: Buriable battery controller programmed over Bluetooth from a phone, for zones with no power. Eight models across the two ranges

TBOS-II Series

DC Controller

Connection: One 9 V alkaline battery, type 6AM6 / 6LR61; roughly one year of life
Best for: The original buriable battery line, for automating awkward areas where AC power is not available

ESP-BAT-BT

DC Controller

Best for: Battery controller programmed over Bluetooth, for valves with no power available

Filtration 1

Drip Filters, Valves & Pressure Regulators

Filtration

Best for: Rain Bird’s filter, valve and pressure regulator range for low-volume drip zones

Pressure regulator 1

PRS Pressure Regulating Stems

Pressure regulator

Pressure: Regulates to 30 psi
Sizes: Available in every pop-up height
Best for: The regulator lives inside the spray body stem rather than upstream, so every head is individually regulated to 30 psi — no misting from over-pressure at the near end of a zone

Rain Bird by category

Dripline·Metal impact sprinkler·Plastic impact sprinkler·Micro-sprinkler·AC Controller·DC Controller·Filtration·Pressure regulator