Tavlit Products — Wholesale Distributor | ML Irrigation

ML Irrigation / Manufacturers / Tavlit

Tavlit make the practical middle of an irrigation system — valves, filters, fittings and sprinklers that do the job without the price of a premium badge. Useful where a system needs sound components in quantity rather than the top of a manufacturer's range.

23 products · 5 categories · wholesale · ships nationwide

Tavlit part numbers cover families rather than single items. Tell us the size and connection and we will pin down the exact part.

Request a quote

Micro-sprinkler 16

861 Mini Compact

Micro-sprinkler

Flow: 0.09–0.70 gpm (20–160 l/h) at 29 psi
Pressure: Optimal 14.5–32 psi (1.0–2.2 bar); max range 14.5–43.5 psi
Pressure comp.: PC version available
Throw diameter: 18–30 ft (5.5–9.0 m)
Best for: Large wetting diameter, and can be run inverted. Anti-insect swivel seals the nozzle when water shuts off; integral nozzle filter. Filtration 100 mesh to 40 lph, 80 mesh to 90 lph, 60 mesh to 160 lph

862 Mini Compact

Micro-sprinkler

Flow: 0.09–0.70 gpm (20–160 l/h) at 29 psi
Pressure: Optimal 14.5–32 psi (1.0–2.2 bar); max range 14.5–43.5 psi
Pressure comp.: PC version available
Throw diameter: 12.5–23.6 ft (3.8–7.2 m)
Best for: Medium wetting diameter; optional RJC removable jet converter cuts the diameter for young plants and trees

863 Mini Compact

Micro-sprinkler

Flow: from 0.09 gpm (20 l/h) at 29 psi
Pressure: Optimal 14.5–32 psi (1.0–2.2 bar); max range 14.5–43.5 psi
Pressure comp.: PC version available
Throw diameter: 18–30 ft (5.5–9.0 m)
Best for: Small wetting diameter, low flow and large droplets for wind resistance. Optional RJC converter for young stock

866 Mini Compact

Micro-sprinkler

Flow: 0.09–0.70 gpm (20–160 l/h) at 29 psi
Pressure: Optimal 14.5–32 psi (1.0–2.2 bar); max range 14.5–43.5 psi
Pressure comp.: PC version available
Throw diameter: 18–30 ft (5.5–9.0 m)
Best for: Flat angle with large wetting diameter, designed for inverted mounting

80X Series Bridge Design

Micro-sprinkler

Flow: 0.09–1.06 gpm (20–240 l/h) at 29 psi
Pressure: 14.5–36 psi (1.0–2.5 bar)
Throw diameter: 1–33 ft (0.2–10.5 m)
Best for: Robust bridge design for harsh conditions. Series 800 large wetting diameter, 801 low pressure with large diameter, 803 inverted for greenhouses

803 Upside Down

Micro-sprinkler

Flow: 0.09–1.06 gpm (20–240 l/h) at 29 psi
Pressure: 14.5–36 psi (1.0–2.5 bar)
Throw diameter: 1–33 ft (0.2–10.5 m)
Best for: Installed inverted for greenhouse irrigation

806 Static Sprayer

Micro-sprinkler

Flow: 0.09–1.06 gpm (20–240 l/h) at 29 psi
Pressure: 14.5–36 psi (1.0–2.5 bar)
Throw diameter: 1–33 ft (0.2–10.5 m)
Best for: Static sprayer (806 / 806S) for medium to small wetting diameter

807 Bubbler

Micro-sprinkler

Flow: 0.09–1.06 gpm (20–240 l/h) at 29 psi
Pressure: 14.5–36 psi (1.0–2.5 bar)
Throw diameter: 1–33 ft (0.2–10.5 m)
Best for: Bubbler head for basin and container irrigation

TriJet Series

Micro-sprinkler

Flow: 0.05–0.79 gpm (12–180 l/h) at 29 psi
Pressure: 22–52 psi (1.5–3.5 bar)
Pressure comp.: PC version available
Best for: Three-jet static sprayer within the 4XXX range

Peleg Series

Micro-sprinkler

Flow: 0.05–0.79 gpm (12–180 l/h) at 29 psi
Pressure: 22–52 psi (1.5–3.5 bar)
Pressure comp.: PC version available
Best for: Static sprayer head within the 4XXX range

961 Single Jet

Micro-sprinkler

Flow: 0.53 & 0.70 gpm (120 & 160 l/h)
Pressure: 22–52 psi (1.5–3.5 bar)
Best for: Single jet, low flow to cut precipitation rate while holding uniformity

4XXX Series

Micro-sprinkler

Flow: 0.05–0.79 gpm (12–180 l/h) at 29 psi
Pressure: 22–52 psi (1.5–3.5 bar)
Pressure comp.: PC version available
Best for: Static emitters — no moving parts. NFR nozzle flow reducer gives low flow through a relatively large nozzle to prevent clogging. Irrigates with fine drops and no mist. Colour-coded sprayer heads

831 Insect Protected

Micro-sprinkler

Flow: 0.06–1.06 gpm (14–240 l/h) at 29 psi
Pressure: 14.5–36 psi (1.0–2.5 bar)
Pressure comp.: PC version available
Throw diameter: 18–33 ft (5.5–10.4 m)
Best for: Large wetting diameter. Nozzle-protection swivel shuts off after operation so insects and dirt cannot enter the water passages. Runs as low as 1 bar and 14 lph

841 Insect Protected

Micro-sprinkler

Flow: 0.06–1.06 gpm (14–240 l/h) at 29 psi
Pressure: 14.5–36 psi (1.0–2.5 bar)
Pressure comp.: PC version available
Throw diameter: 18–33 ft (5.5–10.4 m)
Best for: Large/medium wetting diameter with the same anti-insect swivel; special bridge design prevents dripping

850 / 850D Part Circle

Micro-sprinkler

Flow: 0.06–1.06 gpm (14–240 l/h) at 29 psi
Pressure: 14.5–36 psi (1.0–2.5 bar)
Pressure comp.: PC version available
Throw diameter: 18–33 ft (5.5–10.4 m)
Best for: Part circle covering a 200° sector; adding the 850D deflector reduces it to 180°. Ideal for strip irrigation with heads overlapping from both sides

Series 700 Dynamic Sprayer

Micro-sprinkler

Flow: 0.18–0.70 gpm (40–160 l/h) at 29 psi
Pressure: 21–32 psi (1.5–2.2 bar)
Throw diameter: 10–18 ft (3.0–5.4 m)
Sizes: 7 nozzles, 0.9–1.8 mm (.039"–.071")
Best for: A thin needle inside the orifice vibrates in operation, constantly clearing the nozzle and stopping debris building up; it also shuts the nozzle at the end of irrigation. Can be inverted to shrink the wetted diameter for young plantations, then set upright as the tree grows

Mister & fogger 1

809 Mister

Mister & fogger

Flow: 0.09–1.06 gpm (20–240 l/h) at 29 psi
Pressure: 14.5–36 psi (1.0–2.5 bar)
Throw diameter: 1–33 ft (0.2–10.5 m)
Best for: Misting head within the 80X bridge-design range

Hose & fittings 3

Ball Valves

Hose & fittings

Connection: Female x female or male x female; lever or T-handle; swivel versions available
Sizes: ½", ¾" and 1" — catalogue numbers BV12F / BV34F / BV1F (female x female), BV12FM / BV34FM / BV1FM (male x female), and BV12FT / BV34FT / BV1FT and BV12FMT / BV34FMT / BV1FMT for the T-handle versions
Best for: Twelve catalogue numbers across three sizes and four handle/thread combinations, so the valve matches the run rather than needing an adaptor either side. The T-handle gives more leverage on a valve that gets opened and shut daily; the swivel versions let you line up the body without twisting the pipe

Butterfly Valves

Hose & fittings

Connection: Brass and polypropylene bodies; valve-box mounting available
Sizes: 2" and 4"; catalogue numbers BFV12Q and BFVP
Best for: Butterfly pattern for larger-diameter isolation where a ball valve becomes hard to turn. Brass or polypropylene body depending on water chemistry

Compression Fittings & Connectors

Hose & fittings

Connection: Compression on PE pipe; male and female threaded adaptors, tees, elbows, crosses, end plugs, starters and nut locks
Sizes: FC series couplings from ½" to 2" including reducing sizes (FC12, FC34, FC1, FC114, FC112, FC2, FC1234, FC134, FC112114) and FA series adaptors (FA1234, FA1634, FA1734B, FA2034)
Best for: A full compression range with the reducing couplings that matter in practice — FC1234 joins ½" to ¾", FC134 joins ¾" to 1", FC112114 steps 1¼" to 1½". Nut-lock design so the joint holds without a clamp

Bench & tubing support 1

Agri Stands & Adjustable Risers

Bench & tubing support

Best for: Stands and adjustable risers to carry a sprinkler at the right height above the crop as it grows

Spray stakes & emitters 2

PC Dripper Assemblies & Drip Kits

Spray stakes & emitters

Pressure comp.: Yes
Best for: Ready-made PC dripper assemblies and drip kits — dripper, tube and spike supplied together rather than assembled on the bench

Drip Spike

Spray stakes & emitters

Best for: Spike that anchors the dripper tube in the pot so it stays where it was set

Tavlit by category

Micro-sprinkler·Mister & fogger·Hose & fittings·Bench & tubing support·Spray stakes & emitters